DEF CON 34 MOCA 10-in-1 Multi-Tool

Everything you need a tool for at a con is small. A battery door. A zip tie. A bottle. A box on the vendor floor. None of it justifies carrying a folding multi-tool, and all of it justifies carrying something.

The MOCA (Multiple Operational Carry Accessory) is ten functions cut from a single piece of hardened 420 stainless steel, 2.670" long, 0.100" thick, half an ounce. This edition is laser-etched with the DEF CON 34 design and produced in limited quantities. It loads inside a Keyport Pivot alongside your keys, or rides on a keyring on its own. Non-bladed, which is the entire point when you are flying home from Las Vegas.

Ten Tools, No Bulk

One piece of steel, no moving parts, nothing to fold open or lock shut. At 0.100" thick it sits flat in a Pivot stack instead of protruding, which is the difference between a tool you carry and a tool you leave at home.

Tool Functions

• Bottle opener
• Flathead screwdriver
• Pry tool
• Scoring tool
• Package opener
• Hex bit driver
• 1/4" wrench
• 5/16" wrench
• 3/8" wrench
• 2" ruler

Key Features

• Limited Edition DEF CON 34 Design - laser-etched, produced for this year's conference
• Hardened 420 Stainless Steel - single piece construction, rust resistant, no moving parts
• Non-Bladed - built to travel in a carry-on
• Loads Inside the Pivot - sits in the stack with your keys rather than hanging off it
• 0.5 oz, 0.100" Thick - adds function without adding profile
• Works Standalone - built-in loop attaches to any standard keyring or clip

Specs

• Material: Hardened 420 stainless steel
• Length: 2.670"
• Width: 0.590"
• Thickness: 0.100" (2.54mm)
• Weight: 0.5 oz
• Compatibility: Keyport Pivot, or standalone on a keyring or clip
• Edition: Limited run, laser-etched for DEF CON 34

What You Get

• (1) DEF CON 34 MOCA 10-in-1 Multi-Tool

Build the Rest of the Carry

• DEF CON 34 Pivot 2.0 - the chassis this tool was designed to live inside, in titanium or black anodized aluminum.
• USB-C Flash Drive Insert - loads into the same stack alongside the MOCA and your keys.
• Pocket Flare 2.0 - mounts to the outside of the Pivot for 90 lumens and three modes.
• DEF CON 34 Collection - faceplates, YubiKey skins, challenge coin, patches, lanyard reel, and quick release.

Frequently Asked Questions: DEF CON 34 MOCA 10-in-1 Multi-Tool

Is the MOCA Tool TSA-compliant?

The MOCA is non-bladed, and non-bladed multi-tools are permitted in carry-on baggage. Final determination always rests with the TSA agent at the checkpoint, so if you are unwilling to risk it, pack it in checked baggage.

What makes this version DEF CON 34 exclusive?

It carries laser-etched DEF CON 34 graphics and is produced in a limited run for this year's conference. Once it sells out, it is not reordered.

Does the MOCA fit in a Keyport Pivot?

Yes. The MOCA loads inside the Pivot chassis as an insert, sitting in the stack alongside your keys rather than mounting to the outside.

Does the MOCA fit a Keyport Slide?

No. The MOCA 10-in-1 is built for the Pivot. It also works on its own using the built-in loop on any keyring or clip.

Can I use it without a Keyport Pivot?

Yes. The built-in loop attaches to any standard keyring, carabiner, or clip, and every function works the same way off the chassis as on it.

What is it made of?

Hardened 420 stainless steel, cut as a single piece. No moving parts, no pivots, nothing to fold or lock.

How thick is it?

0.100", which is 2.54mm. That is thin enough to sit flat in a Pivot stack without protruding.

What size hex bits does it drive?

The hex bit driver accepts standard 1/4" hex bits. The tool also includes 1/4", 5/16", and 3/8" wrench cutouts.

Who the DEF CON 34 MOCA Tool Is For

• The DEF CON 34 MOCA 10-in-1 is best for travelers who want a multi-tool that clears airport security without a blade to remove.
• It is best for Keyport Pivot owners who want tool functions loaded inside the chassis instead of hanging off it.
• It is best for anyone who wants ten functions at half an ounce with no moving parts to wear out.
• It is best for collectors building a run of DEF CON pieces by year.

Limited edition, produced for DEF CON 34 and available here and at the Keyport booth in Las Vegas.