IN STOCK. Next Day Delivery & Collection Available
Key Features:
- Size: 105g
- Colour: Clear
- Ratio: Add 1 inhibitor pot per 10kg of Flexitec 2020 Resin (or 2 pots per 20kg)
- Application: Helps reduce premature curing and material waste in high tempretures
Description:
Restec Flexitec 2020 High Temperature Resin Inhibitor is a specialist additive designed to extend the working time of Flexitec 2020 Resin during warm weather applications. Ideal for use in summer conditions or when roof surface temperatures are elevated, it helps installers maintain a consistent application without the resin curing too quickly.
By increasing the resin's pot life, the inhibitor provides additional time for laying reinforcement matting, detailing complex areas and achieving a smooth, professional finish. It is added directly to Flexitec 2020 Resin before the powder hardener and is intended solely for use with the Flexitec 2020 roofing system. It is not a replacement for the powder hardener, which must still be added at the recommended rate before application.
Perfect for professional flat roofing contractors working in high temperatures, the Flexitec 2020 High Temperature Resin Inhibitor helps reduce material waste, improves control during installation and ensures reliable curing performance in challenging summer conditions.
- Extends the pot life of Flexitec 2020 Resin in hot weather.
- Ideal for summer roofing applications and high surface temperatures.
- Allows more time for reinforcement, detailing and finishing.
- Helps reduce premature curing and material waste.
- Added to the resin before powder hardener.
- Designed exclusively for use with Restec Flexitec 2020 Resin.
- Easy to mix on site.
- Suitable for professional flat roofing installations.
Application Guide:
- Add 1 inhibitor pot per 10kg of Flexitec 2020 Resin (or 2 pots per 20kg).
- Thoroughly mix the inhibitor into the resin before adding the Flexitec Powder Hardener.
- Continue to add the powder hardener at the recommended dosage (minimum 2%).
- Store resin in a cool location where possible before use to maximise working time.
- Approximately 15–20 minutes of additional pot life when resin temperatures are between 15°C and 25°C.
- Approximately 8–10 minutes of additional pot life when temperatures exceed 25°C.
Please Note: This product is an additive only and must never be used as a substitute for Flexitec Powder Hardener. Always follow the latest Restec application instructions for best results
Downloads & Data Sheets:
FlexiTec 2020 Application Guide