Rust Scat® - Polyurethane Int/Ext Enamel Coating Gloss Finish 31
This product is formulated to offer a high quality, durable gloss enamel finish on interior or exterior metal surfaces where a rust preventative coating is needed. The wetting characteristics of this product allow for use on less than ideal surfaces.
Features
- Durable Rust-Preventative Coating
- Quick Drying
- Suitable for use as a DTM coating
- Alkyd Gloss Enamel
- Non-Chalking
- Tenacious Adhesion
- Interior/Exterior
Recommended For
A durable rust preventive coating for metal substrates in commercial, institutional, and residential applications. Not recommended for immersion service. Interior/Exterior.
Limitations
- Apply only when surface and air temperatures are between 7.2 °C (45 °F) and 35 °C (95 °F).
- Do not apply if rain is threatening or if the temperature is within 5 degrees of the dew point and falling.
- Not recommended for immersion service.
Rust Scat® - Polyurethane Int/Ext Enamel Semi-Gloss 13
This product is formulated to offer a high quality, durable semi-gloss enamel finish on interior or exterior metal surfaces where a rust preventative coating is needed. The wetting characteristics of this product allow for use on less than ideal surfaces.
Features
- Durable Rust-Preventive Coating
- Quick Drying
- Suitable for use as a DTM Coating
- Alkyd Semi-Gloss Enamel
- Non-Chalking
- Tenacious Adhesion
- Interior/Exterior
Recommended For
A durable rust preventive coating for metal substrates in commercial, institutional, and residential applications.
Limitations
- Apply only when surface and air temperatures are between 7.2 °C (45 °C) and 35 °C (95 °F).
- Do not apply if rain is threatening or if the temperature is within 5 degrees of the dew point and falling.
- Not recommended for immersion service.
Rust Scat® - Int/Ext Waterborne Acrylic Metal Primer 36
This is a water reducible Acrylic Metal Primer for coating steel, pre-engineered metal building parts and other steel that is exposed to a normal commercial or residential environment. It may be used in areas where solvent fumes are a problem or where ecological concerns dictate. May be top coated with conventional alkyd, oil based and latex type paints. It may also be used as a tie-coat over zinc rich primers. Provides protection from rust bleed and flash rust. An excellent choice for galvanized metal.
Features
- Controls Rust On Ferrous Metal
- Excellent Choice For Galvanized
- Quick Dry
- Top Coat with Oil, Alkyd or Latex Paints
- Waterborne Acrylic Metal Primer
- Water Clean-up
Recommended For
For commercial and residential applications. For normal atmospheric service on ferrous metal and galvanized metal in commercial and industrial applications. It provides protection from rust bleed and flash rust. Use on interior or exterior steel surfaces, including structural members, steel buildings, tools and machinery. It is an excellent choice for galvanized metal. Not intended for immersion services.
Limitations
- Apply at temperatures between 10°C (50°F) and 32.2°C (90°F).
- Do not paint if within 5° of Dew Point or if rain is expected within 12 hours.
- Not recommended for immersion service.
Additional Product Information
Additional product information including sell sheet and SDS / TDS