• Beginner/Intermediate Level • 8 ½” x 38” 56 pieces
Magnolia blooms with leaves, there are a couple of ladybugs included with the pattern. Door topper design A Wonder Wheel was used for adding texture on the leaves.
Woods Used: Various shades of Western Red Cedar, Aspen for the White, If I made this project again I would use some green poplar for the leaves.
Suggested Blades: Gold #5 for Western Red Cedar or any softwood. Platinum Plus #5, Platinum #5, TLB #5 for the hardwoods. PLP-2/0, or TLB #2/0 to cut the interior lines (after the exterior lines are cut).
Intarsia pattern designed by Judy Roberts. See why our patterns are the best!
Magnolia blooms with leaves, there are a couple of ladybugs included with the pattern. Door topper design A Wonder Wheel was used for adding texture on the leaves.
Woods Used: Various shades of Western Red Cedar, Aspen for the White, If I made this project again I would use some green poplar for the leaves.
Suggested Blades: Gold #5 for Western Red Cedar or any softwood. Platinum Plus #5, Platinum #5, TLB #5 for the hardwoods. PLP-2/0, or TLB #2/0 to cut the interior lines (after the exterior lines are cut).
Launch DateOctober 21, 2016
Days In Market3,656
Vendorintarsia.com
Variants2