Glass Railing Square Fascia Mount Post with Handrail Bracket • Inline Design

The Glass Railing Square Fascia Mount Post with Handrail Bracket is part of Inline Design’s Chicago Square Style Glass Railing System. This version is designed for side-mounted glass railing installations where the post attaches to the fascia or side face of the structure and includes top hardware for a handrail or top rail.

The post comes with a pyramid handrail bracket and pivotable saddle at the top, allowing round, square, or rectangular handrail/top rail tubing to be mounted above the glass railing system. Built from a 1.57" x 1.57" / 40 x 40 mm square stainless steel profile with a 12 gauge / 0.102" / 2.6 mm wall thickness, this post is a heavy-duty option for modern glass railing systems that need clean square lines, strong post construction, fascia mounting, and integrated handrail support.

Use it for balconies, decks, porches, patios, stairs, landings, terraces, indoor railings, outdoor railings, wet or dry locations, residential projects, and commercial projects when installed according to local code, approved mounting conditions, glass requirements, and project-specific engineering.

Glass panels are purchased separately. This post system is designed for use with compatible tempered or laminated glass panels. Verify glass thickness, panel height, panel width, local code requirements, and project-specific engineering before ordering glass.

Compatible Glass Warehouse glass panels at Home Depot

Quick Product Highlights

Fascia / Side Mount	Mounts to the side face of the structure using the required fascia mounting plate configuration
Handrail Support	Includes pyramid handrail bracket and pivotable saddle for mounting handrail/top rail tubing above the post
Heavy-Duty Post	40 x 40 mm square post with 12 gauge / 2.6 mm wall thickness
Glass Clamp System	Includes square glass clamps based on selected post type: right, left, middle, corner, or stair configuration
Finish Options	316 Satin Stainless Steel and Black Matte Powder Coat options
Glass Compatibility	For 3/8", 1/2", or 9/16" tempered or laminated glass
Important	Glass panels, handrail/top rail tubing, and fascia mounting anchors are not included

Project Gallery

Images Gallery

Sacramento, CA

Austin, TX

Details

System	Chicago Square Style Glass Railing System
Mount Type	Fascia mount / side mount installation
Top Rail Hardware	Included with this version: pyramid handrail bracket and pivotable saddle for handrail/top rail tubing
Profile Size	1.57" x 1.57" / 40 x 40 mm
Post Thickness	12 gauge / 0.102" / 2.6 mm heavy-wall construction
Glass Thickness	3/8", 1/2", or 9/16" tempered or laminated glass
Satin Stainless Steel	AISI 316 stainless steel for wet, dry, indoor, outdoor, and coastal environments with routine stainless steel maintenance
Black Matte Powder Coat	Black Matte powder coat over AISI 304 stainless steel
Finish Standard	ASTM A480 No. 4 linearly textured satin finish for satin stainless steel options
Handrail Compatibility	Designed for round, square, or rectangular handrail/top rail tubing installed above the post
Post Preparation	Pre-drilled and tapped M8 x 1.25 mm for square glass clamps
Construction	Heavy-duty construction, sturdy upon completion, and designed for straightforward installation
Installation	Side mount installation to approved fascia, framing, concrete, steel, blocking, or other structural substrates using project-specific anchors
Code References	Designed for guardrail systems installed according to applicable IBC, IRC, and ASTM E2358 requirements, subject to project layout, anchoring, glass type, post spacing, handrail/top rail continuity, and engineering review

Available Configurations

Heights	36" and 42"
Post Types	Right, Left, Middle, Outside Corner, Inside Corner, Stair Lower, Stair Middle, and Stair Upper
Finish Options	316 Satin Stainless Steel; Black Matte Powder Coat over 304 SS Post Only; Black Matte Powder Coat over 304 SS Post & Glass Clamps

What Is Included in the Kit?

Post	(1) square fascia mount post, pre-drilled and tapped M8 x 1.25 mm
Pyramid Handrail Bracket	(1) included for mounting handrail/top rail tubing above the post
Square Base Cover	(1) included
Square Glass Clamps	(4) for Middle Post or (2) for End Post Included with every clamp: Each glass clamp includes its own M8 × 1.25 mounting bolt for attaching the clamp to the post.
Fascia Plate	(1) included. Use Flat for Middle Posts or End Posts, Outside Corner for Outside Corner Posts, and Inside Corner for Inside Corner Posts.

Important Installation Notes

Glass panels are not included. Glass must be provided by a local vendor.
Handrail/top rail tubing is not included. Select compatible round, square, or rectangular tubing based on the project design.
Fascia mounting anchors are not included. Due to the variety of mounting surfaces, customers must supply the appropriate connecting hardware, including screws, bolts, anchor bolts, or other project-specific fasteners. For substrate-specific fastener guidance and recommended approaches, see Anchoring Options for Railing Posts.
Anchor selection must be based on the mounting surface, including fascia framing, concrete, steel, wood blocking, or other approved structural substrates.
Stair posts and other custom posts require an additional fee to account for custom post fabrication and CAD drawings specific to the customer field measurements when necessary.
Custom fabrication requires a minimum of 1–2 weeks for production.
Handrail height, top rail layout, guardrail height, glass type, post spacing, fascia plate location, anchoring, and other structural requirements must be verified against local code and project-specific engineering.
For coastal or high-corrosion environments, stainless steel must be cleaned and maintained regularly.

Handrail Bracket M6 Screw Direction Disclaimer

The direction of the M6 screw on the handrail bracket may vary. The M6 screw that secures the saddle on top of the post may be positioned either on the inside or the outside face. This orientation is random and depends on the production batch. We cannot guarantee a specific direction, and mixing post batches may result in variation. This does not affect structural performance.

Required Safety Pins and Glass Notches for Fascia-Mounted Posts

Safety pins are required for fascia-mounted and side-mounted glass railing applications.

Using the safety pins requires matching notches in the glass. Inline Design recommends two notches at the bottom of each panel, positioned for the two lower safety pins.

The downloadable drawing applies to 3/8-inch, 1/2-inch, and 9/16-inch glass. Provide it to the glass fabricator before the panel is ordered or cut, and confirm the clamp orientation and project requirements before fabrication.