The new Super Finish Max paint sprayer does it all.
This paint sprayer can spray paint everything from furniture and cabinets to fences and walls, and it covers a wider array of projects with less thinning and hassle. Spray oil or water based materials such as: chalk type paint, milk paint, latex paints, enamels, primers, clear sealer, polyurethane, stain and varnish.
Less Thinning Required
With 450 watts of power, the Super Finish Max Paint Sprayer can handle thicker paints and varnishes which means less thinning.
More Versatile
With 6 available spray tips (3 included), you can tackle a wide variety of projects such as furniture and cabinets, but also take on fences, decks, and walls, which are uses typically outside the capability of an HVLP sprayer.
Larger Capacity
The 39 fluid ounce container enables you to spray larger projects without having to refill as often, which is a huge time saver!
How it Works
HVLP sprayers use a high volume of air at low pressure to atomize the material your applying, producing a factory-like finish and greatly reducing overspray. Its internal air turbine provides a continuous flow to spray materials.
- 1.5mm, 2.0mm, and 4.0mm interchangeable tips included for more project versatility (Green 2.0 mm spray tip comes installed on the sprayer)
- Two different air caps to help control the flow of material
- Adjust the volume control knob to change spray pattern from 1” to 12” wide
- 450 watts of power sprays thicker paints
- 39 ounce container capacity
- Less paint thinning required
- Newly designed pickup tube and cup vent
- Sprays evenly to lay down a professional finish
- Backed by a 2 year warranty
Maintain Your Sprayer for Long-Lasting Performance
Keep your Finish Max or Super Finish Max running smoothly for years by using the Rapid Clean. This helpful cleaning tool is an easy way to tidy up your sprayer after each project.
The Quickest Way to Wash Your Sprayer
To ensure repeated, reliable performance, you should clean your paint sprayer after each use. The Rapid Clean functions by quickly and effectively flushing your paint sprayer with water to remove any leftover or dried paint.
- Step 1 - Attach the clear tube to the sprayer’s pickup tube and secure with the hose clamp.
- Step 2 - Screw the faucet attachment to a utility sink faucet or garden hose.
- Step 3 - Reinsert the pickup tube into the cylinder housing on the sprayer.
- Step 4 - Turn on the water and pull the trigger to flush the unit. WARNING: Never plug sprayer into power outlet when using the Rapid Clean.
Comes With:
- 3 Interchangeable Brass Needle/Tips
- Tip Attachment Wrench
- 2 Air Caps
- Container Storage Lid