Description

Note: This unit does not include a power supply and funnel. (To be purchased separately)

New to iFEED? Please see the iFEED starter pack.

The iFEED is installed on the outside of the stall for easy access.

Installation options:

• Install iFEED using the funnel to guide feed into the feed bucket through the stalls bars/mesh. (Please refer to funnel sizes.) Our straight back trough works well in this configuration and can be purchased separately. Using an existing feed bucket that is secured to the wall works well too.
• Install iFEED with a slant back trough (sold separately). The slanted back guides feed into the trough inside the stall from the outside mounted hopper. No additional funnels needed. It does require that a hole be cut in the stall front to accommodate the slanted back. (See pictures)

* iFEED has a 30-day money back guarantee. (Not incl. shipping).
Product must be undamaged, and in its original packaging for a full refund.

Dimensions

iFEED unit:
Length: 21”
Width: 10”
Depth: 7”
Capacity: 12 pounds

Funnels:
Long: 10.5” L x 2.25” W
Short: 8.5” L x 3” W

Power supply:
Length: 9”
Width: 7”
Depth: 4.5”

Troughs
Straight back trough: 15.5” wide x 13” deep (front to back) x 17” tall.

Slant back trough: 15.5” wide x 13” deep (front to back) + additional 6” for slant x 15.5” tall (incl. slant)

Videos

Instructions

Installation & User Guide

iFEED Automatic Horse Feeder Stainless Steel Bracket Installation

Attaching the funnel