The shallowest grid we make. Less digging, less stone, less muckaway.

At just 30mm deep, the IBRAN®-X30 is our shallowest ground reinforcement grid. Made from 100% recycled PP/HDPE, it combines a lower-profile installation with serious strength, tested to 650 tonnes/m² compression resistance and an axle load capacity of up to 50 tonnes.

Just 30mm deep When finished levels are tight, every millimetre matters. The shallower profile makes X30 particularly useful for installations where excavation depth needs to be kept to a minimum or you're working around existing levels.

Less depth to fill Compared with a 40mm grid, the 30mm cell depth means less aggregate is required to fill the grid itself, reducing the amount of material needed across larger installations.

Use a 6–20mm blended angular or decorative gravel. The X30 is designed for a graded blend that can settle effectively within its 68mm × 68mm octagonal cells while maintaining a permeable surface.

The 500mm × 500mm grids provide 0.25m² coverage each, with four grids covering one square metre. The fully permeable open-cell construction allows unrestricted drainage through the system.

X30 can also be used for grass reinforcement, as well as paths, landscaped areas, garden access and other light-duty applications.

Which depth? Choose IBRAN®-X30 when a shallower installation is important. IBRAN®-X40 provides a deeper 40mm system for driveways, parking areas and access routes, while IBRAN®-X50 provides additional depth for applications that call for a deeper reinforcement system.