- All-in-one 12V COB strip kit: Includes strip, 60W power supply, RF dimmer, connectors, and clips for a complete setup.
- Spotless, dot-free COB lighting: COB LED strip delivers 290–300 lm/ft of smooth, continuous light with no visible LED hotspots.
- Cuttable LED strip: Trim every 2.5 inches to fit cabinets, shelves, and coves precisely using the built-in cut marks.
- Long-term warranty coverage: 6-year LED strip warranty, 3 years on the power supply, 2 years on the RF dimmer.
The Premium 12V COB LED Strip Light Bundle (16.4 ft kit) is a complete, plug-and-play package for smooth, dot-free accent lighting. It pairs a high-density 12V COB strip with a matched 60W power supply, RF dimmer, connectors, and basic mounting accessories so most indoor projects can be finished without hunting for extra parts.
At the heart of the kit is a 16.4 ft (5 m) COB LED strip using flip-chip technology to create a continuous line of light instead of visible LED points. With 290–300 lumens per foot, 90–100 lm/W efficiency, and a 180° beam angle, it works well under cabinets, along toe-kicks, in coves, or on shelving where smooth illumination matters. The strip is 10 mm wide, UL Listed, IP20 indoor-rated, and cuttable every 2.5 in (63.5 mm) for custom lengths.
The included 12V 60W power supply (UL Listed, plug-in style) and R110 RF dimmer kit turn the bundle into a ready-to-use lighting system. The driver outputs 12V DC at up to 5A, while the dimmer provides 10 levels of brightness via 433.92 MHz RF control with power-off memory and overheat protection. Pre-wired wire lead connectors, wire clips, and an installation guide streamline setup for residential and light commercial projects.
COB LED Strip- LED type: Flip-chip COB
- Length / width: 16.4 ft (5 m), 10 mm (0.4 in) wide
- Input voltage: 12V DC
- Cut length: 2.5 in (63.5 mm); 12 LEDs per cut section
- Waterproof rating: IP20 (indoor use only)
- Warranty: 6 years
- Input: 110–240V AC, 47–63 Hz (NEMA 1 plug)
- Output: 12V DC, 60W (5A)
- Output cable: 4 ft with 5.5 × 2.1 mm DC jack
- IP rating: IP30 indoor use
- Warranty: 3 years
- Function: Single-color (white) PWM dimmer, constant-voltage
- Rated output current: 5A max
- Brightness levels: 10 white brightness grades
- RF frequency / range: 433.92 MHz, >15 m in open area
- Controller size: 50 × 15 × 7 mm
- Warranty: 2 years
WHAT'S INCLUDED:
- 1 × 16.4 ft (5 m) 12V COB LED strip light
- 1 × 12V 60W plug-in power supply (UL Listed)
- 1 × R110 RF remote dimmer kit (controller + handheld remote)
- 2 × wire lead connectors
- 2 × wire clips
Q: What exactly is included in this 12V COB strip bundle?
A: The bundle includes a 16.4 ft COB LED strip, a 12V 60W power supply, an R110 RF dimmer kit, two wire lead connectors, two wire clips, and an installation guide. It’s designed as an all-in-one indoor lighting solution for most standard cabinet, cove, and accent projects.
Q: Can this kit be used outdoors or in damp locations?
A: No. The COB strip is IP20 rated, and the included power supply is IP30, so the bundle is intended for indoor use only in dry locations. For areas exposed to moisture, a higher-rated product and appropriate enclosures would be required.
Q: How long is the warranty on each component?
A: The COB LED strip carries a 6-year warranty, the power supply has a 3-year warranty, and the R110 RF dimmer is covered for 2 years, when used within the specified electrical and environmental limits.
Q: Can I cut the strip to custom lengths?
A: Yes. The strip is cuttable every 2.5 inches (63.5 mm) at the marked cut lines. Each cut section contains 12 LEDs. After cutting, sections can be reconnected or wired using compatible connectors and standard low-voltage practices.
Q: Is the strip dimmable with the included components?
A: Yes. The kit includes an R110 RF dimmer that provides 10 levels of brightness via PWM constant-voltage output. The dimmer sits between the power supply and the strip, offering smooth, remote-controlled dimming without extra hardware.
Q: How do I track my order or handle a damaged item?
A: Once the order ships, an email with a tracking number and carrier link is sent so shipment can be followed online. If a product arrives damaged, HitLights advises customers to call 1-855-768-4135 or email customerservice@hitlights.com for assistance.
SHIPPING DETAILS:
- Standard Shipping (3-5 Days) - Shipping cutoff 3PM (PST).
- FREE ground shipping (UPS or FedEx) on orders of $199 or more
- Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST)
- 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST)
- Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)