- Hotspot-free COB light: Advanced COB LED heads spread an even, bright wash instead of “dotty” strip or halogen hotspots.
- Fully adjustable heads: Fixtures rotate 360° left/right and tilt about 90° up/down to target graphics and products precisely.
- Plug-and-play tradeshow setup: 100–240V AC input, bottom on/off switch, and included clamps/brackets make booth installs fast.
The 14V COB Tradeshow Armlights 20W, 2pcs are high-output display fixtures designed to light trade show booths, backdrops, and exhibits with smooth, even illumination. Each arm uses a COB (chip-on-board) LED module that delivers a bright, continuous beam without the pin-prick hotspots common with older fixtures.
Running at 20W per arm and producing 2500 lumens of 6000K cool-white light, these armlights provide strong visual impact while staying energy-efficient and low-voltage. An integrated driver accepts 100–240V AC input and outputs 14V DC, making the lights safe to handle on busy show floors and compatible with venues worldwide.
Adjustable heads rotate 360° side-to-side and tilt about 90° up or down, so installers can fine-tune angle and throw for graphics, signage, or product shelving. The housings use iron, aluminum, and ABS, with aluminum helping move heat away from the COB module to support long life in demanding event schedules.
Each kit ships with C-clamps, mounting brackets, and power cables, so there’s no need to source separate hardware for typical tradeshow frames and walls. These indoor-rated fixtures are ideal for exhibition halls, retail displays, art shows, and other environments where bright, clean white light is critical.
- LED type: COB LED arm lights, 40 COBs per arm
- Wattage: 20W per arm light
- Light output: 2500 lumens per arm
- Color temperature: 6000K cool white
- Input voltage: AC 100–240V
- Output voltage: 14V DC low-voltage operation
- Materials: Iron + aluminum + ABS housing
- Adjustability: 360° left/right rotation; ~90° up/down tilt
- Package dimensions: 24 × 7 × 2.75 in (2-pack)
- Use rating: Indoor use only
- 2 × COB LED display arm lights (black, 14V DC, 20W each)
- 2 × C-clamps for attaching to booth frames or panel edges
- 2 × mounting brackets for alternative mounting positions
- 2 × power cables (AC 100–240V input to each arm light)
Q: What are COB tradeshow armlights and why choose them?
A: These are COB LED arm lights designed to illuminate trade show booths, backdrops, and displays with a smooth, even beam. COB (chip-on-board) technology spreads light more uniformly than individual diodes, reducing hotspots and creating a clean, professional look for graphics and products.
Q: How bright are these lights and what color is the output?
A: Each arm light consumes 20W and produces 2500 lumens of 6000K cool-white light. This combination delivers high brightness with crisp color that helps text, logos, and merchandise stand out under exhibition-hall conditions without wasting power.
Q: Are these COB armlights dimmable or on/off only?
A: The product is specified as a constant-voltage/constant-current COB arm light with on/off switching from the fixture. It is typically used as a non-dimming display light; any dimming would need to be handled by compatible upstream control equipment designed for 14V, 20W loads per fixture.
Q: Can these tradeshow armlights be used outdoors?
A: No. The 14V COB Tradeshow Armlights are for indoor use only. They are intended for exhibition halls, retail interiors, galleries, and similar spaces. If used near exterior doors or humid areas, the fixtures should still be kept dry and protected from direct weather.
Q: What mounting options are provided in the kit?
A: Each kit includes C-clamps and mounting brackets, allowing the armlights to be attached directly to booth frames, panel tops, or other display structures. This plug-and-play hardware eliminates the need to source separate tradeshow-specific mounts for most setups.
Q: Where can I use these COB armlights besides trade shows?
A: They are suitable for many indoor display applications, including exhibition halls, art exhibitions, shopping malls, jewelry and furniture stores, home basements, and presentation backdrops or educational displays—anywhere bright, focused, cool-white light is needed.
Q: What is the warranty and what if my lights arrive damaged?
A: The COB tradeshow armlights carry a 2-year warranty. If a fixture arrives damaged, HitLights asks customers to call 1-855-768-4135 or email customerservice@hitlights.com for assistance, and to use the shipment tracking email to follow the order’s status.
SHIPPING DETAILS:
- Standard Shipping (3-5 Days) - Shipping cutoff 3PM (PST).
- FREE ground shipping (UPS or FedEx) on orders of $199 or more
- Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST)
- 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST)
- Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)