- Solderless 10mm strip connections – screw-terminal design joins single-color 10mm strips or wires without soldering skills.
- Built for 5–24V single-color strips – supports most 5V, 12V, and 24V mono LED or COB strips.
- Transparent housing for quick checks – clear polycarbonate body lets installers confirm pad and wire alignment at a glance.
- Safety-focused, indoor rated – UL94V-0 flame-retardant material with IP20 indoor rating and 105°C temperature resistance.
- Strip-to-Strip and Strip-to-Wire options – choose the connector style that matches the job; both use the same compact 2-pin, 4.5 mm pitch format.
These 10mm 2 Pin Solderless Transparent Terminal Block LED Light Strip Connectors give installers a frustration-free way to connect or extend single-color LED strip runs. A screw-fixed, snap-close terminal block secures both the 10mm strip and supply wiring, so connections can be made cleanly on site without a soldering iron.
The connectors are designed for 5–24V DC mono LED tape or COB strips with a 10mm PCB width and 0.25–0.35 mm PCB thickness, covering most single-color under-cabinet, cove, display, and task-lighting applications. The transparent housing makes it easy to visually verify that pads and conductors are seated correctly, helping reduce troubleshooting time and callbacks.
Constructed from polycarbonate and copper, the terminal blocks combine impact resistance with reliable current handling. An IP20 indoor rating, UL94V-0 flame-retardant performance, and 105°C (221°F) temperature resistance support safe operation in typical residential and light commercial environments. Strip-to-strip and strip-to-wire variants give flexibility for both in-line joins and transitions from strip to power leads or jumpers.
- Voltage rating: 5V–24V DC
- Max current: 6A per connector
- Strip type: single-color (mono) flexible or rigid LED/COB strip
- PCB width / thickness: 10mm wide, 0.25–0.35 mm thick
- Connection types:
- Board-to-wire (CON-10S-TB-SW-12PK): 13.3 × 11.5 × 6.4 mm
- Board-to-board (CON-10S-TB-SS-12PK): 14.6 × 11.5 × 6.4 mm
- Housing: transparent polycarbonate housing, copper conductors
- IP rating: IP20 indoor use
WHAT'S INCLUDED:
-
12 × 10mm 2-Pin solderless transparent terminal block connectors
-
Choose Strip-to-Wire (board-to-wire) or Strip-to-Strip (board-to-board); each pack includes 12 connectors of the selected style.
-
-
1 × mini screwdriver for tightening the screw terminals
Q: What type of LED strip lights are these 10mm connectors designed for?
A: These connectors are made for single-color LED or COB strip lights with a 10mm wide PCB and 0.25–0.35 mm thickness. They support flexible and rigid mono strips commonly used for under-cabinet, cove, shelving, and display lighting.
Q: What voltage and current can each connector handle?
A: Each terminal block is rated for 5V–24V DC and up to 6A of current. This covers most typical single-color LED strip runs when the total load per run stays within both the strip and connector ratings.
Q: Do I need to solder, or can these be installed with basic tools?
A: No soldering is required. Installation involves inserting the 10mm strip and compatible wire into the connector, then tightening the screws with the included mini screwdriver to secure the connection. This makes on-site joins and repairs fast and accessible.
Q: What wire gauge works with the strip-to-wire version?
A: The strip-to-wire connectors are designed for 20–16 AWG multi-stranded sheathed cable or flat wire. Staying within this range helps ensure a firm clamp in the screw terminals and reliable power delivery to the LED strip.
Q: Are these connectors suitable for outdoor or damp environments?
A: No. With an IP20 indoor rating, these 10mm 2-pin terminal blocks are intended for indoor, dry-location use only. For areas exposed to moisture, they should be protected inside suitable enclosures and paired with appropriately rated LED strips.
Q: What is the difference between the strip-to-strip and strip-to-wire versions?
A: The strip-to-strip (board-to-board) version links two sections of 10mm mono strip directly in line, while the strip-to-wire (board-to-wire) version transitions from strip to power leads or jumper wire. Both styles use the same 2-pin, 4.5 mm pitch terminal block platform.
Q: Do these connectors include any safety certifications or flame ratings?
A: Yes. The connectors use polycarbonate housing and copper contacts, carry a UL94V-0 flame-retardant rating, and are specified for 105°C (221°F) temperature resistance, supporting safe use in properly designed indoor LED strip installations.
SHIPPING DETAILS:
- Standard Shipping (3-5 Days) - Shipping cutoff 3PM (PST).
- FREE ground shipping (UPS or FedEx) on orders of $199 or more
- Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST)
- 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST)
- Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)