- True solderless connection: Simple clasp on each end locks onto cut strip sections, no tools or soldering iron required.
- Works with indoor, outdoor, and waterproof strips: Compatible with 10mm single-color LED strips in 12V and 24V systems, including many coated options.
- Multi-purpose connector: Use as strip-to-strip extension, strip-to-wire pigtail, or building block for T-connectors and orientation changes.
The 5 Inch Any Angle 2Pin 10mm Solderless LED Light Strip Connector is a flexible jumper designed to solve common layout challenges with single-color LED strips. A 5-inch cable links two 10mm clasp connectors, allowing the strip run to cross gaps, turn corners, or route around obstacles while maintaining clean, continuous light.
Each end uses a snap-close, solderless connector that attaches directly to a cut section of 10mm LED strip. This tool-free design is ideal for installers who need quick, reliable connections in kitchens, cabinets, shelving, displays, and other accent-lighting projects. The connector works with 12V and 24V 10mm single-color LED strips, including many indoor, outdoor, and waterproof models, and is fully compatible with dimmable systems.
Because the jumper is fully bendable, it can be shaped into right-angle corners, gentle curves, or custom paths without flexing the LED strip itself. It can also serve as a strip-to-wire pigtail when one side is cut, or be combined with multiple jumpers to build simple T-style junctions, offering a versatile way to handle non-linear layouts.
- Connector type: 2-pin solderless jumper for 10mm single-color LED strips
- Cable length: approx. 5 in (127 mm) between strip connection ends
- Strip compatibility: most 10mm wide single-color LED strips, including many indoor, outdoor, and waterproof formats
- System compatibility: designed for 12V and 24V constant-voltage single-color LED strip lighting; works with dimmable setups
- Typical applications: corners and bends, jumping across gaps, routing around obstacles, connecting to power supplies or dimmers
- Connection method: snap-close clasp; attaches directly to cut strip pads without solder or special tools
WHAT'S INCLUDED:
-
10 × 5 Inch Any Angle 2-Pin 10mm solderless LED strip connectors
Q: What exactly does the “5 Inch Any Angle” connector do?
A: It’s a flexible jumper that links two sections of 10mm single-color LED strip using a 5 inch cable between them. This lets the strip run cross gaps, turn corners, or route around obstacles while keeping continuous light and electrical connection.
Q: Which LED strips are compatible with this connector?
A: The connector is designed for 10mm wide single-color LED strips in 12V or 24V systems. It works with most standard indoor, outdoor, and waterproof single-color strip formats, as long as the tape width is 10mm and the cut pads align with the 2-pin layout.
Q: Can this connector be used with dimmable LED strip setups?
A: Yes. The any-angle connector is compatible with dimmable single-color LED strip installations and can be used between the strip and a dimmable power supply or dimmer, provided all components share the same voltage and load ratings.
Q: Do I need tools or soldering to install it?
A: No tools or soldering are required. Each end uses a snap-close clasp that attaches to the cut strip section; the installer simply opens the connector, seats the LED strip pads, and snaps it closed to create a secure electrical connection.
Q: Can it act as a strip-to-wire pigtail?
A: Yes. By cutting one end off the jumper and stripping the internal conductors, the connector can be used as a strip-to-wire pigtail to connect a 10mm strip to a power supply, dimmer, or other wiring accessory, following standard low-voltage wiring practices.
Q: Is it possible to create T-style connections with these?
A: It is. Multiple 5 inch any-angle jumpers can be combined to form simple T-connectors, for example by using three strip-to-wire pigtails to branch the strip in two directions from a main run, as demonstrated in HitLights’ connector guidance content.
Q: Can I bend the jumper to a sharp 90-degree corner without damaging the strip?
A: Yes, the cable itself is designed to be fully bendable, so corners and tight angles are made in the jumper, not the LED strip. This reduces stress on the strip and supports L-shaped or irregular layouts without kinking or cracking the LED tape.
SHIPPING DETAILS:
- Standard Shipping (3-5 Days) - Shipping cutoff 3PM (PST).
- FREE ground shipping (UPS or FedEx) on orders of $199 or more
- Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST)
- 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST)
- Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)