- Heavy-duty 3M VHB acrylic foam: Holds up to 3 lb per 2 in of tape when properly applied.
- Waterproof and weatherproof: Performs indoors and outdoors, adhering even in damp conditions once cured.
- Easy, hardware-free installation: Red peel liner and included plastic applicator for fast, clean, no-drill mounting.
This heavy duty double-sided mounting tape from HitLights uses genuine 3M VHB acrylic adhesive on a 0.025 in foam core to replace screws and other mechanical fasteners in permanent mounting jobs. It is engineered to hold up to 3 lb per 2 in of tape when fully compressed on clean, smooth surfaces, making it suitable for demanding applications.
Each roll provides 10 feet (3.05 m) of black tape at 0.39 in (10 mm) width, ideal for mounting LED strip lights, small signs, trim, panels, mirrors, and plastic parts. The foam core helps the tape conform to minor surface irregularities while adding cushioning and vibration damping, which is useful in automotive, equipment, and cabinet installs.
The acrylic adhesive is waterproof and weather-resistant for indoor and outdoor use, adhering even in damp environments once fully cured. A red peel-off liner makes placement easy to see, and the included plastic applicator helps press the tape firmly into place for maximum bonding strength with no drilling, screwing, or heating required.
- Tape Type: Heavy-duty double-sided mounting tape, made with 3M VHB adhesive
- Foam Core Thickness: 0.025 in (0.64 mm)
- Tape Length: 10 ft (3.05 m)
- Tape Width: 0.39 in (10 mm)
- Waterproof: Yes, suitable for indoor and outdoor use
- Flexibility: Designed to resist curling and stays easy to peel if not fully compressed
WHAT'S INCLUDED:
-
1 × roll of heavy-duty double-sided mounting tape, 10 ft (3.05 m) length, 0.39 in (10 mm) width, 0.025 in thick foam core
Q: What is this 10 ft double-sided mounting tape used for?
A: This tape is a heavy-duty 3M VHB foam mounting tape for attaching LED strip lights, signs, trim, panels, mirrors, plastic parts, and other objects without screws or nails. It is designed for permanent, high-strength bonding on clean, smooth indoor and outdoor surfaces.
Q: How strong is the adhesive, and how much weight can it hold?
A: The tape can hold up to 3 lb per 2 in section when properly applied and fully compressed. Its adhesive strength is approximately 1 lb per inch of width, so installers should use enough tape surface area for the weight of the object and allow curing time before stressing the bond.
Q: Is this tape waterproof and suitable for outdoor use?
A: Yes. The tape is waterproof and weather-resistant, making it suitable for both indoor and outdoor applications. Once fully cured, it adheres reliably even in damp conditions and can be used on exterior trim, outdoor signage, and similar projects.
Q: Does the tape have a foam core, and why does that matter?
A: The tape has a 0.025 in thick foam core that provides cushioning and helps it conform to uneven surfaces. This viscoelastic foam construction also helps absorb vibration and movement, improving long-term performance in automotive, equipment, and cabinet installations.
Q: Is the tape flexible, or does it curl during installation?
A: The tape is flexible and is designed to resist curling, which helps keep it flat and easy to manage during installation. As long as it has not been fully compressed, it remains simple to peel back and reposition to fine-tune alignment.
Q: How should I apply the tape for the best results?
A: Start with a clean, dry surface free of dust, oil, and loose paint. Apply the tape, use the included plastic applicator to press it firmly for full contact, then remove the red liner and press the mating surface into place with steady pressure. Full bond strength develops after proper compression and curing.
Q: Will the tape leave residue, and how can it be removed?
A: Because this is a heavy-duty VHB foam tape, removal may be difficult and can leave adhesive behind. To reduce adhesion, gently warm the tape with a heat gun or steamer, lift an edge with a sharp, flat tool, and peel slowly at a low angle. Any remaining residue can be cleaned with a surface-safe adhesive remover.
SHIPPING DETAILS:
- Standard Shipping (3-5 Days) - Shipping cutoff 3PM (PST).
- FREE ground shipping (UPS or FedEx) on orders of $199 or more
- Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST)
- 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST)
- Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)