- Heavy-duty 3M VHB acrylic foam: Holds up to 3 lb per 2 in of tape when properly applied.
- 16 ft roll, 0.94 in (24 mm) wide: Wide format for heavier objects, LED channels, trims, and panels.
- Waterproof, weather-resistant adhesive: Works for indoor and outdoor installs, even in damp conditions.
- Easy, hardware-free installation: Red peel liner and plastic applicator for quick, clean, no-drill mounting.
This heavy-duty, double-sided mounting tape utilizes industrial-grade 3M VHB acrylic adhesive to replace screws, nails, and other mechanical fasteners in permanent mounting applications. The tape is rated to hold up to 3 lb per 2 inches of width when fully compressed on clean, smooth surfaces, making it suitable for demanding projects and heavier items.
Each roll provides 16 feet (4.87 m) of black tape at 0.94 inches (24 mm) wide, with a 0.025 inch (0.64 mm) thick foam core. The viscoelastic foam helps the tape conform to slight surface irregularities and provides cushioning and vibration damping—ideal for automotive, equipment, cabinet, and sound-dampening installations.
The acrylic adhesive is waterproof and weatherproof for both indoor and outdoor use. Once fully cured, it adheres reliably even in damp environments and under changing weather conditions. A red peel-off liner makes placement visible and easy to manage, and the included plastic applicator tool helps press the tape firmly into place for maximum bond strength with no drilling, screwing, or heating required.
Key Specs:
- Adhesive Type: Acrylic, made with 3M VHB adhesive
- Foam Core Thickness: 0.025 in (0.64 mm)
- Tape Length: 16 ft (4.87 m)
- Tape Width: 0.94 in (24 mm)
- Waterproof: Yes, suitable for indoor and outdoor applications
- Flexible Adhesive Tape: Designed to resist curling and stay easy to peel if not fully compressed
-
1 × roll of heavy duty double-sided mounting tape, 16 ft (4.87 m) length, 0.94 in (24 mm) width, 0.025 in (0.64 mm) foam core
Q: What is this 16 ft double-sided mounting tape used for?
A: This tape is a heavy duty 3M VHB foam mounting tape for attaching LED strip lights, signs, trim, panels, mirrors, plastic parts, and other objects without screws or nails. It is designed for permanent, high-strength bonding on clean, smooth indoor and outdoor surfaces.
Q: How strong is the adhesive and how much weight can it hold?
A: The adhesive is rated at about 1 lb per inch of width and can hold up to 3 lb per 2 in section when properly applied and fully compressed. For best results, use enough tape surface area for the load and allow curing time before placing the bond under stress.
Q: Is this tape waterproof and suitable for outdoor use?
A: Yes. The tape is waterproof and weather-resistant, so it can be used indoors and outdoors, including in damp conditions. Once fully cured, it adheres reliably even in environments exposed to moisture and varying temperatures.
Q: Does the tape have a foam core, and why does that matter?
A: The tape has a 0.025 inch thick foam core that provides cushioning and helps it conform to uneven surfaces. This viscoelastic foam, combined with the acrylic adhesive, makes the tape suitable for most common surfaces and for installations where vibration or minor movement is expected.
Q: Is the tape flexible, or does it curl during installation?
A: The tape is flexible and designed to resist curling, which keeps installation fast and straightforward. It remains simple to peel and reposition as long as it has not been fully compressed into place.
Q: Does the tape leave residue when removed, and how do I remove it?
A: Because of its strong adhesive, removal can be challenging and may leave residue if not done carefully. Use a heat gun or steamer to soften the adhesive, lift an edge with a sharp, flat tool, and peel slowly at a low angle; any remaining adhesive can be cleaned with a suitable adhesive remover that is safe for the surface.
Q: Is it easy to apply this tape?
A: Yes. The red liner makes it easy to see and peel the tape, and the included plastic applicator helps press it firmly into place. No drilling, screwing, or heating is required—just peel, stick, and compress for a secure bond.
SHIPPING DETAILS:
- Standard Shipping (3-5 Days) - Shipping cutoff 3PM (PST).
- FREE ground shipping (UPS or FedEx) on orders of $199 or more
- Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST)
- 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST)
- Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)