- Weatherproof Eclipse RGB kit: IP65-rated pre-cut strips handle outdoor conditions and indoor rooms.
- Four 12-inch RGB strips, ready to go: 48" of 5050 RGB tape shipped in pre-cut lengths for fast layout around TVs, patios, bars, or decks.
- Plug-and-play kit: Includes controller, DC power supply, 4-pin jumper leads, and wire clips.
The Weatherproof 4 Pre-Cut 12 Inch / 48 Inch RGB LED Strips Eclipse Kit takes the original Eclipse concept and extends it outdoors. Four 12-inch RGB 5050 LED strips come pre-cut, pre-wired, and coated to an IP65 weatherproof standard, so they can handle splashes and exposure in covered exterior areas as well as indoor installs.
An Eclipse RGB controller with a 21-key 360° RF remote and a 12V DC power supply turn the strips into a complete, plug-and-play color-changing system. There’s no hunting for cut points or specialty connectors; each strip is already sized, and the included 4-pin plug-and-play jumpers make it easy to route around corners or gaps.
The kit uses RGB 5050 high-output chips with a 120° beam angle for even, saturated color along the full 48-inch run. Upgraded 3M blue-backed adhesive and adhesive-backed wire clips help keep the strips and extension wires neatly in place on most smooth, clean surfaces. With a 2-year warranty and weather-resistant construction, the kit is well-suited for accent lighting on patios, bars, game rooms, or event decor.
- LED type: RGB 5050 SMD
- Color: RGB multicolor
- Total length: 48" - four pre-cut 12" strips (black PCB)
- Strip width: 10 mm
- Input voltage: 12V DC (via included power supply)
- Waterproof rating: IP65 weatherproof strip (controller and PSU are for typical dry-location use)
- Remote type: 360° RF remote, 21-key layout
- Control distance: approx. 49–66 ft, even with obstacles
WHAT'S IN THE BOX
- 1 × Eclipse RGB controller with 21-key RF remote
- 4 × 12-inch Eclipse RGB color-changing LED strip lights
- 1 × 12V DC power supply (compact adapter with approx. 4 ft output cord)
- 4 × 12 inch 4-pin plug-and-play extension wires
- 8 × adhesive-backed wire mounting clips
Q: Is this Eclipse RGB kit really suitable for outdoor use?
A: The LED strips in this kit are IP65 weatherproof, which means the coated tape can handle rain splashes and general outdoor exposure when properly mounted. The power supply and controller should still be kept in dry, protected locations or enclosures.
Q: What exactly comes with the weatherproof Eclipse kit?
A: Each kit includes an Eclipse RGB controller with RF remote, four 12 inch weatherproof RGB strips, a 12V DC power supply, four 12 inch 4-pin extension wires, and eight adhesive-backed wire clips. That’s everything needed for a standard installation—no extra accessories are required for basic use.
Q: Can I cut these LED strips to custom lengths?
A: No. The strips are shipped as pre-cut 12 inch segments that make up a 48-inch system. They are not intended to be cut shorter, which keeps installation simple and avoids issues with incorrect cut points or failed sections.
Q: Do I need additional connectors or wiring to install this kit?
A: For typical layouts, no. The kit already includes 4-pin plug-and-play extension wires and wire clips, so most users can install and route the strips without buying extra connectors. Additional accessories are only needed for special mounting scenarios or extended runs.
Q: How far away can the RF remote control the lights?
A: The 360° RF remote has an effective control distance of roughly 49–66 ft, and it works even when there are obstacles between the remote and controller. This allows the controller to be hidden out of sight without sacrificing usability.
Q: How long is the warranty for this waterproof Eclipse kit?
A: HitLights lists a 2-year warranty for this kit, covering the LED strips and other components when used within the specified voltage, environmental, and installation guidelines.
Q: How can I track my order once it ships?
A: When the order ships, an email is sent with a tracking number and a link to the carrier (UPS or USPS). Following that link lets you see shipment status and estimated delivery in real time.
SHIPPING DETAILS:
- Standard Shipping (3-5 Days) - Shipping cutoff 3PM (PST).
- FREE ground shipping (UPS or FedEx) on orders of $199 or more
- Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST)
- 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST)
- Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)