The KBS Tour V-X Lite brings the stability of the Tour V-X to a lightweight steel iron shaft. KBS says it is over one full flex stiffer than any shaft in its weight class while keeping the KBS feel. This listing is the 0.355" taper-tip version, sold one shaft per iron in R (90 g), S (95 g) or X (100 g), chrome.
Before you order: each shaft is made for one iron, so order one per club. See How Tapered (0.355") Tip Shaft Lengths Work.
Who It's For
Good fit if you...
- Swing fast but want a lighter steel shaft, 90 to 100 g
- Want a light shaft that stays stable instead of feeling loose
- Want tight dispersion and a true flight
- Have irons with a 0.355" taper-tip hosel and want a shaft made for each iron
Not the right fit if you...
- Want the same idea at tour weight: the KBS Tour V-X runs 105 to 130 g
- Want a light shaft built for a higher flight and extra spin: see the KBS Tour Lite
- Have irons with a 0.370" parallel tip: see the KBS Tour V-X Lite 0.370"
- Are not sure which tip your irons take: take the Iron Shaft Finder Quiz first
How It Plays
Stiff for its weight. KBS says the V-X Lite design is over one full flex stiffer than any shaft produced in its category, and that its weight-to-strength ratio is nearly 20% higher than any iron shaft before it.
Less bend, truer flight. The extra stiffness keeps the shaft straighter through the swing and moves it less at impact, so KBS says the flight is less affected by shaft bending.
A players' model. KBS built the V-X Lite in its Players' Model category for faster swing speeds, with the feel and control better players ask for. R and S come from the 4-iron down; X adds a 3-iron.
Specifications
KBS's figures for every flex we sell.
| Series | Flex | Weight (g) | Raw Length | Clubs (KBS) |
|---|---|---|---|---|
| Tour V-X Lite | R | 90 | 39.5" to 37" | 4i to 9i, PW, SW |
| Tour V-X Lite | S | 95 | 39.5" to 37" | 4i to 9i, PW, SW |
| Tour V-X Lite | X | 100 | 40" to 37" | 3i to 9i, PW, SW |
Material: steel, chrome finish | Tip: 0.355" taper | Butt diameter: 0.600" | KBS publishes no torque, launch, spin or bend point figures | Source: KBS official Tour V-X Lite specs, checked October 2026
Will It Fit Your Irons?
This shaft is for irons with a 0.355" taper-tip hosel. Order one shaft for each iron you are reshafting and pick the flex and iron in the dropdown. Each taper-tip shaft is made for its iron, so a 7-iron shaft is not meant to go in your 5-iron. For a wedge, choose the 9-iron / wedge option.
Not sure which tip your irons take, or how long each shaft should be? Read How Tapered (0.355") Tip Shaft Lengths Work, take the Iron Shaft Finder Quiz, or let us install them with our Retrofit Service.
How It Compares to Other KBS Steel Iron Shafts
| Tour V-X Lite (this page) | KBS Tour V-X | KBS Tour Lite 0.355" | |
|---|---|---|---|
| Tip | 0.355" taper | 0.355" taper | 0.355" taper |
| How it's sold | One shaft per iron | One shaft per iron | One shaft per iron |
| Weights (KBS) | 90–100 g | 105–130 g | 95–105 g |
| Flexes | R, S, X | R, R+, S, S+, X, TX | R, S, X |
| Design (KBS) | Over one flex stiffer than its weight class | Stiff, stable profile for a true flight | Higher trajectory, additional spin |
| Finish | Chrome | Chrome | Chrome |
See every KBS iron shaft, read our KBS Shaft Guide, or start with our Iron Shaft Buyer's Guide for material, weight and flex basics.