This is a pack of 8 Iomic Sticky 3.5 grips in black with a red cap, for regripping up to 8 clubs. The Iomic Sticky 3.5 sits between the standard Sticky 2.3 and the midsize Sticky Mid 4.4: a little fuller than standard without the jump to a true midsize. It has a 1.5 torque rating with Iomic's Low Torque Control (LTC). Same 50 g grip on an M60 core as our single Sticky 3.5 page. Grip tape and solvent aren't included. Stock on the 3.5 packs is low right now.
Not sure of your size? Measure from the crease of your wrist to the tip of your middle finger, then check our grip size guide.
What's in the Pack
- 8 x Iomic Sticky 3.5 grips, in black with a red cap
- Not included: grip tape, solvent and installation
Installing them yourself? Add our installation kit (14 tape strips plus solvent) and follow our regripping guide.
Who It's For
Good fit if you...
- Are regripping a set of irons and wedges and already have tape and solvent
- Find standard grips a little thin but midsize too much
- Keep adding a wrap or two of tape to standard grips
- Want a fuller grip without adding weight
Not the right fit if you...
- Are doing a different number of clubs. There's a 9-pc set and a 13-pack.
- Only need one or two. Grab the single Sticky 3.5.
- Want a true standard. That's the Sticky 2.3 8-pack.
- Need a full midsize. Grab the Sticky Mid 8-pack.
How It Plays
Just a bit more in your hands. The 3.5 is slightly thicker than a standard grip. It's made for golfers who find standard a bit thin but don't want a full midsize.
The end cap reads OVERSIZE. It isn't. Iomic stamps OVERSIZE on the cap to mark its size category, but this is not a jumbo. Don't let the cap scare you off if you're shopping for something between standard and midsize.
The most stable regular Sticky. At 1.5 on Iomic's torque scale, it rates lower than the 2.3 (2.7) and the Mid 4.4 (1.9). Low Torque Control (LTC) is built into this grip.
Skip the extra wraps. If you've been building up standard grips with 2 extra layers of tape, the 3.5 gets you a similar feel with just the normal single layer, which makes an 8-club regrip a lot quicker. You'll need 8 strips; our installation kit has 14. Same 50 g as the 2.3, so swingweight doesn't move.
Specifications
| Spec | Sticky 3.5 (each grip) |
|---|---|
| Size | Between standard and midsize (cap stamped OVERSIZE) |
| Core | M60 (fits standard 0.600" butt shafts) |
| Weight | 50 g (±2 g) |
| Material | IOMAX elastomer |
| Special feature | Low Torque Control (LTC) |
| Torque rating | 1.5 |
| Made in | Thailand |
| Colors in this pack | Black (red cap) |
| Grips in the pack | 8 |
Specs from Iomic, checked October 2026. Torque is Iomic's own twist measurement: the lower the number, the less the grip twists.
Which Pack Do I Need?
| Option | Grips | Tape, solvent and clamp | Best for | |
|---|---|---|---|---|
| Single grip | 1 | Not included | Replacing one or two grips | View |
| 8-pack (this page) | 8 | Not included | A set of irons and wedges, with your own tape and solvent | You're here |
| 9-pc set | 9 | Not included | A 9-club iron and wedge set, with your own tape and solvent | View |
| 13-pack | 13 | Not included | The whole bag, with your own tape and solvent | View |
Count the clubs you're regripping. Most golfers do everything but the putter, which takes a different kind of grip.
Right Size?
| Size | Core | Weight | Torque | |
|---|---|---|---|---|
| Sticky 1.8 (undersize) | M60 | 48 g | 2.7 | View |
| Sticky 2.3 (standard) | M60 | 50 g | 2.7 | View |
| Sticky 3.5 (between standard and midsize, this one) | M60 | 50 g | 1.5 | You're here |
| Sticky Mid 4.4 (midsize) | M60 | 56 g | 1.9 | View |
| Sticky Jumbo 5.5 (jumbo) | M60 | 65 g | 1.9 | View |