The Graphite Design Raune (said "Raw-nay", from a Japanese word meaning "aim") is a graphite iron shaft with a high-modulus core for stability and a pitch fiber outer layer for stiffness and feel. This listing is the 0.370" parallel-tip version, a 39" length you trim for each iron, in 60 g Regular, 75 g Regular or 90 g Stiff. The 60 and 75 are built for a mid-high flight; the 90 for a mid flight.
Before you order: each shaft is one 39" length that is tip trimmed for its iron, then butt trimmed to playing length, so order one per club.
Who It's For
Good fit if you...
- Want light graphite irons from 62 to 93 g
- Want a mid-high flight (60 and 75 g) or a mid flight (90 g)
- Play Regular or Stiff flex
- Have irons with a 0.370" parallel-tip hosel
Not the right fit if you...
- Want a heavier Raune in a taper tip: see the Graphite Design Raune 0.355" (105 g, S or X)
- Need X-Stiff: the 0.370" Raune comes in R and S only
- Have irons with a 0.355" taper tip: see the Tour AD-75 Iron or take the Iron Shaft Finder Quiz
- Do not want to trim shafts yourself: use our Retrofit Service
How It Plays
Core and outer layer. Graphite Design builds the Raune with high-modulus material in the core for stability and pitch fiber on the outside to tune stiffness and feel.
Two flights. Graphite Design rates the 60 g and 75 g mid-high launch and mid-high spin with a low-mid kick point, and the 90 g mid launch, mid spin and mid kick point.
Firmer as it gets heavier. Graphite Design's bend profile chart puts the 60 at medium butt, soft mid and soft tip; the 75 at medium, medium, soft; and the 90 at firm, medium, medium.
Specifications
Graphite Design's figures for every build we sell.
| Series | Flex | Weight (g) | Torque (°) | Butt Dia. | Launch | Spin | Kick Point |
|---|---|---|---|---|---|---|---|
| Raune 60 | Regular | 62.0 | 4.2 | 0.582" | Mid-high | Mid-high | Low-mid |
| Raune 75 | Regular | 73.0 | 3.6 | 0.586" | Mid-high | Mid-high | Low-mid |
| Raune 90 | Stiff | 93.0 | 3.1 | 0.596" | Mid | Mid | Mid |
Material: graphite (high-modulus core, pitch fiber outer layer) | Tip: 0.370", 4.0" parallel section | Raw length: 39" | Source: Graphite Design official Raune Iron specs, checked October 2026
Will It Fit Your Irons?
This shaft is for irons with a 0.370" parallel-tip hosel. Every build is one 39" length. Graphite Design's tip trim is 0" for the 3-, 4- and 5-iron, then 0.5" for the 6-iron, 1.0" for the 7-iron, 1.5" for the 8-iron, 2.0" for the 9-iron and 2.5" for the 10-iron or wedge; after tip trimming, cut from the butt to your playing length. Order one shaft per club.
Not sure which tip your irons take? Take the Iron Shaft Finder Quiz, or let us trim and install them with our Retrofit Service.
How It Compares to Other Graphite Design Iron Shafts
| Raune 0.370" (this page) | Graphite Design Raune 0.355" | Tour AD-75 Iron | |
|---|---|---|---|
| Tip | 0.370" parallel | 0.355" taper | 0.355" taper |
| How it's sold | One 39" length you trim | One shaft per iron | One shaft per iron |
| Weights we sell | 62 g, 73 g, 93 g | 108–115 g | 78 g |
| Flexes | R (60, 75), S (90) | S, X | R, S |
| Launch (Graphite Design) | Mid-high (60, 75), Mid (90) | Mid | Mid-high |
| Spin (Graphite Design) | Mid-high (60, 75), Mid (90) | Mid | Mid |
See every Graphite Design shaft, browse all graphite iron shafts, read our Graphite Design Shaft Guide, or start with our Iron Shaft Buyer's Guide for material, weight and flex basics.