The ZXi LS Driver’s advanced low spin profile is a perfect match for players with aggressive swings who want to dominate the distance game. Two adjustable sole weights placed in the front and rear allow you to dial in your preferred spin characteristics for a lower ball flight and extra yards after carry.
All-new Srixon ZXi Drivers bring pure, tour-inspired performance to every tee box. With three unique models—all featuring our new i-flex technology—ZXi Drivers are designed to push the limit of performance with better ball speed, powerful distance, and advanced adjustability. take your long game to new heights, only with ZXi.
This completely redesigned face thickness pattern produces more efficient energy transfer at impact. The added strength of the interior i-FLEX face structure allows the center of the face to be thinner than last gen, increasing ball speed.
Complex latticework creates the structural integrity necessary to support an ultralight, remarkably thin titanium crown, ultimately allowing discretionary mass to be set where it best suits each ZXi Driver's ideal launch and spin characteristics.
Rebound Frame is an entirely unique system that amplifies energy transfer at impact. By utilizing two flex zones, instead of just one, Rebound Frame maximizes flex across the face to increase power, ball speed, and, ultimately, shot distance.
Brand new for ZXi Drivers, visible Laser Face Milling has been added to the surface to help stabilize spin and add forgiveness in wet conditions.
Two adjustable sole weights placed in the heel and toe allow you to adjust the swing weight and Center of Gravity to favor a draw or fade shot shape. And an all-new, 1.5-degree hosel sleeve lets you fine tune Driver loft, lie, and face angle.
| Loft | Lie | Length† | Swing Weight | Club Weight | Availability |
| 8.0° | 59° | 45.75" | D3.5 (S), D4.5 (X) | 326g (X), 317g (S, R) | RH |
| 9.5° | 59° | 45.75" | D3.5 (S), D4.5 (X) | RH/LH | |
| 10.5° | 59° | 45.75" | D3.5 (R, S) | RH |
† To match USGA and R&A Industry guidelines, Srixon has modified how club lengths are measured and published. Our published length specifications are now approximately ½" longer for Drivers.
Note: The actual length of the Drivers has not changed, only how they are measured.
Note: This is for your reference only and does not denote the content of the product.
| Flex | Weight | Torque | Tip Diameter | Launch | Spin |
| X (6.5) | 75g | 3.0° | .335" | Low | Low |
| S (6.0) | 65g | 3.2° | .335" | Low | Low |
| R (5.5) | 65g | 3.5° | .335" | Low | Low |
| Size | Core | Weight |
| Standard | .580" | 52g |

Aldila Ascent PL helps you wing the golf club faste with no sacrifice in feel. It was designed to help golfers gain more speed.

Aldila Ascent Ultralight 40 models deliver an easy, high launch angle without the typical compromises of an ultra-lightweight shaft. Featuring Focused Mass Technology (FMT), a precise weighting section that utilizes heavier, tungsten-infused prepreg in the butt end to help players turn through the ball better for stronger, straighter/drawn ball flight.

Aldila Rogue Silver MSI offers unmatched performance and consistency through the use of advanced, extremely high modulus, Graphitic Carbon Fibers that provide performance characteristics never before available in a golf shaft.
| Model | Flex | Weight (g) | Torque | Kick Point |
| Aldila Ascent PL 40 | W, Light, R | 42, 43, 44 | 6.9, 6.8, 6.7 | Mid-Low, Mid-Low, Mid-Low |
| Aldila Ascent Ultralight 40 | R | 47 | 8.2 | - |
| Aldila Rogue Silver 110 MSI 60 | S, X | 64, 66 | 3.7, 3.5 | High, High |

Aretera AO2 Blue stands in a class of its own with intelligent design, fined-tuned craftsmanship, and meticulous manufacturing.

Aretera AO2 Gray Active in the handle and firm mid to tip, the AO2 converts premiere engineering into shot repeatability.

Aretera EC1 Blue Utilizes ultra premium exotic materials to the layup in critical areas and in strategic orientations promoting enhanced torsional stability with a seemingly effortless flowing transfer of power.

Aretera EC1 Gray Enhances overall connectedness and torsional stability throughout the shaft without compromising feel or performance while minimizing excessive spin common to off center hits. Promotes more consistency in repeatable centerness of contact and a more fluid loading of the shaft not typically experienced in compliant mid-section designs.
| Model | Flex | Weight (g) | Torque | Kick Point |
| Aretera AO2 Blue 55 | R | 57.5 | 3.9 | - |
| Aretera AO2 Blue 65 | S, X | 65.5, 66 | 3.5, 3.3 | - |
| Aretera AO2 Blue 75 | X | 78.5 | 3.1 | - |
| Aretera AO2 Gray 65 | S, X | 65.5, 66 | 3.5, 3.3 | - |
| Aretera AO2 Gray 75 | X | 78.5 | 3.1 | - |
| Aretera EC1 Blue 65 | S, X | 68, 69 | 3.6, 3.4 | - |
| Aretera EC1 Blue 75 | S, X | 78, 78 | 3.4, 3.2 | - |
| Aretera EC1 Gray 65 | S, X | 68, 69 | 3.6, 3.4 | - |
| Aretera EC1 Gray 75 | X | 79 | 3.2 | - |
Fujikura Ventus Black Velocore+ enhanced with new VeloCore+ Technology and advanced material designs to offer players even greater performance results than their predecessors.
Fujikura Ventus Blue Velocore+ technology is designed for ultimate clubhead stabilization and promotes consistent center-face contact, tightening dispersion and increasing control of the club throughout the swing.

Fujikura Ventus BLUE
Fujikura Ventus Red Velocore+ Featuring a re-engineered multi-material bias core, VELOCORE+ enhances the feel and performance of VENTUS with an additional premium bias core material, promoting even tighter dispersion and increased ball speeds.

Fujikura Ventus TR Black Ultra-stiff tip and handle sections work in unison to support players with Tour-like speeds that prefer the feeling of minimal to no flex during the swing.

Fujikura Ventus TR Blue an ultra-stiff tip section for superior control at impact. Increased torsional stiffness creates a profile with enhanced load capabilities for more aggressive swings while maintaining a smooth overall feel.

Fujikura Ventus TR Red The softest tip section of the TR lineup is ideal for players seeking a mid-high launch profile with controlled spin and increased stability.
| Model | Flex | Weight (g) | Torque | Kick Point |
| Fujikura Ventus Black 6 VeloCore+ | S, X | 66, 66.5 | 3.2, 3.0 | High, High |
| Fujikura Ventus Black 7 VeloCore+ | S, X | 75, 75.5 | 3.0, 2.9 | High, High |
| Fujikura Ventus Blue 5 VeloCore+ | R, S | 58.5, 58.5 | 3.7, 3.5 | Mid, Mid |
| Fujikura Ventus Blue 5 | R, S | 58, 59 | 4.3, 3.9 | Mid, Mid |
| Fujikura Ventus Blue 6 VeloCore+ | R, S, X | 65, 65.5, 66 | 3.4, 3.3, 31 | Mid, Mid, Mid |
| Fujikura Ventus Blue 6 | R, S, X | 65, 66, 67 | 4.1, 3.7, 3.7 | Mid, Mid, Mid |
| Fujikura Ventus Blue 7 VeloCore+ | S, X | 75.5, 76 | 3.0, 2.9 | Mid, Mid |
| Fujikura Ventus Blue 7 | S, X | 74, 75 | 3.6, 3.5 | Mid, Mid |
| Fujikura Ventus Red 5 VeloCore+ | R2, R, S | 59, 59.5, 59.5 | 3.8, 3.6, 3.4 | Low, Low, Low |
| Fujikura Ventus Red 6 VeloCore+ | R, S | 67, 67.5 | 3.4, 3.3 | Low, Low |
| Fujikura Ventus TR Black 6 | S, X | 69.5, 70 | 3.1, 2.9 | High, High |
| Fujikura Ventus TR Black 7 | S, X | 79.5, 80 | 2.8, 2.7 | High, High |
| Fujikura Ventus TR Blue 5 | R, S | 58, 58 | 3.5, 3.3 | Mid, Mid |
| Fujikura Ventus TR Blue 6 | S, X | 68, 68 | 3.1, 2.9 | Mid, Mid |
| Fujikura Ventus TR Blue 7 | S, X | 77.5, 78.5 | 2.9, 2.7 | Mid, Mid |
| Fujikura Ventus TR Red 6 | S, X | 68, 69.5 | 3.2, 3.0 | Mid, Mid |
GD Tour AD DI is designed to provide golfers with more power and stability in a golf shaft. Designed and manufactured exclusively at the Graphite Design factory headquarters in Japan, the Tour AD DI shafts are available in 50g R2(Lite), R1(Regular) and S flex, 60g SR (Stiff Regular), S and X flex, 70g S, X and TX (Tour X-Stiff) flex, 80g S, X and TX flex and 90g X flex.

GD Tour AD FI adapts to your swing, delivering unparalleled stability and responsiveness. Elevate your game with a shaft that thinks as fast as you play - because intelligent performance starts with the new Tour AD Flight Intelligence golf shaft from Graphite Design

GD Tour AD GC Designed and manufactured in Japan, these wood shafts are pearl white with bronze and orange accents, finished with a gloss clear coat. The Tour AD GC features a stiff butt section, firm center, and firm+ tip, promoting mid launch angles and low/mid to mid ball spin rates.
GD Tour AD HD series is a shaft that maximizes the head performance of large and high moments of inertia, which is the mainstream of wood today.
GD Tour AD IZ introduces the latest in the Tour AD premium line of golf shafts, the Graphite Design Tour AD IZ – “ Into the Zone” . Designed and manufactured at the Graphite Design Japan factory headquarters, the new Tour AD IZ wood shaft has a very stealthy look to it in black with white/orange accents and a sleek new matte finish.

GD Tour AD VF utilizes the modern TORAYCA M40X carbon-fiber material in the butt section of the shaft to support a stiff, yet smooth feeling kick point and the ultra-high modulus TORAYCA T1100G carbon-fiber material in the middle thru to the tip section of the shaft for unrivaled shaft stability and precise ball control without the loss of the exceptional feel.
GD Tour AD XC shaft profile is softer in the butt section, stiff in the center section and has a stiff tip to promote low/mid launch angle and low spin with the ball.
| Model | Flex | Weight (g) | Torque | Kick Point |
| GD Tour AD DI-6 | S, X | 65, 67 | 3.3, 3.3 | Mid, Mid |
| GD Tour AD DI-7 | S, X | 74, 75 | 3.2, 3.1 | Mid, Mid |
| GD Tour AD FI-6 | S. X | 66.5, 68 | 3.2, 3.2 | Mid, Mid |
| GD Tour AD FI-7 | S. X | 75.5, 78 | 2.9, 2.9 | Mid, Mid |
| GD Tour AD GC-5 | R1, S | 52.5, 53 | 4.5, 4.5 | Mid, Mid |
| GD Tour AD GC-6 | SR, S, X | 61.5, 62, 65.5 | 3.1, 3.1, 3.1 | Mid, Mid, Mid |
| GD Tour AD HD-6 | S, X | 66, 68 | 3.1, 3.1 | Mid, Mid |
| GD Tour AD HD-7 | S, X | 74, 76 | 2.9, 2.9 | Mid, Mid |
| GD Tour AD IZ-6 | SR, S, X | 62, 63, 65 | 3.2, 3.2, 3.2 | Mid, Mid, Mid |
| GD Tour AD IZ-7 | S, X | 72, 74 | 3.1, 3.1 | Mid, Mid |
| GD Tour AD VF 6 | S, X | 66.5, 67 | 3.3, 3.3 | Mid/High, Mid/High |
| GD Tour AD VF 7 | S, X | 74, 75.5 | 3.0, 3.0 | Mid/High, Mid/High |
| GD Tour AD XC-6 | S, X | 64, 65 | 3.2, 3.2 | Mid/High, Mid/High |
| GD Tour AD XC-7 | S, X | 73, 75 | 3.0, 3.0 | Mid/High, Mid/High |
KBS TD WOOD SHAFT Designed for performance, optimizing spin rate and launch for more distance and more consistent, tighter ball flights.
| Model | Flex | Weight (g) | Torque | Kick Point |
| KBS TD WOOD SHAFT 50 | R, S, A | 50, 50, 50 | 4.0, 3.9, 4.2 | Low/Mid, Mid, Low |
| KBS TD WOOD SHAFT 60 | R, S, X | 60, 61, 62 | 3.1, 3.1, 3.0 | Low/Mid, Mid, Mid/High |
| KBS TD WOOD SHAFT 70 | S, X | 70, 71 | 2.9, 2.9 | Mid, Mid/High |

MCA Diamana BB the second profile in the most recent generation – is designed with all the traditional branding that made Diamana™ so beloved – including a return to the original 53/63/73/83 weight class designations – and all the engineering prowess and material innovation that made the brand dominant on tour.

MCA Diamana RB was engineered to promote ease of launch while also maintaining control down field. Diamana RB is a classic "Red Board” profile — not available since the 2nd Generation of Diamana — that features an active tip section while still retaining the same material technology package (see below) and low-torque control characteristics as its lower 6th Generation launching counterparts.

MCA Diamana WB Built on an extraordinarily popular and tour-proven platform, the Diamana™ WB model delivers the classic low-low performance and the legendary stability you’ve come to expect, along with the iconic, unmistakable cosmetic so closely associated with the original Diamana™ shafts.

MCA Kai'li Dark Waves Blue utilizes our Super Low Resin Content Prepreg and an MR70-reinforced tip, to make Kai’li Dark Waves Blue a smooth, stable, and durable Classic Mitsubishi Blue profile.

MCA Kai'li Dark Waves Red a high spinning, mid launching shaft that manages to retain stable torque performance comparable to its White and Blue siblings. Built with MR70 for strength and Super Low Resin Content prepreg for feel, Kai’li Red creates different launch and spin characteristics than its siblings a slightly higher balance point.

MCA Kai'li Dark Waves White derives its name from a blend of words that evoke the power of the ocean – the perfect moniker for an unprecedented shaft that explores new depths of strength and performance.

MCA Tensei 1K Blue the mid-launch, mid-spin member of the 1K family. The TENSEI™ 1K Blue features a firm butt-section reinforced with the same 1K Carbon Cloth as the 1K Black shaft, a firm and stable tip-section featuring our proprietary Xlink Tech™ Resin System and a smooth mid-section for ease of transition during the swing.

MCA Tensei 1K Black utilizes a focused application of 1K carbon fiber -- the same high-performance material found in the TENSEI 1K Pro family -- to increase strength in the handle, drive down torque and provide the signature "1K feel."

MCA Tensei AV Series Blue feature a versatile profile finely tuned to deliver a mid-launch and mid-spin profile. Perfect for the golfer looking for more speed through impact to promote a higher launch and enough spin to hold a green.

MCA Tensei AV series White designed for golfers seeking a more penetrating trajectory while still retaining feel and responsiveness. Featuring a stronger profile, AV White is ideal for a higher-spinning player looking to tighten dispersion.

MCA Tensei Kai'li Blue our stablest and smoothest blue profile yet. A modern mid-launching, mid-spinning shaft built to provide the stability demanded by stronger swings and heavier head weights.

MCA Tensei Kai'li White features an exclusive Super Low Resin Content Prepreg in the most consequential part of the golf shaft for feel: the torque core. This application allows for an increased volume of carbon fiber to help drive torque lower, increase stability, and provide greater frequency response to the golfer’s hands... even in a low launch shaft.

MCA Vanquish PL 40 was built to provide high-level performance in a lightweight shaft. It uses Amorphous wire in the butt section. The amorphous wire’s elasticity increases the activity in the handle of the shaft to maximize speed and club head acceleration.
| Model | Flex | Weight (g) | Torque | Kick Point |
| MCA Diamana BB 60 | S, X | 61, 62 | 3.2, 3.2 | Mid/High, Mid/High |
| MCA Diamana RB 60 | R, S | 60, 61 | 3.2, 3.2 | Mid, Mid |
| MCA Diamana WB 60 | X | 63 | 3.1 | High |
| MCA Diamana WB 70 | X | 72 | 2.9 | High |
| MCA Kai'li Dark Waves Blue 60 | R, S, X | 64, 66, 68 | 4.3, 4.2, 4.2 | High, High, High |
| MCA Kai'li Dark Waves Red CB 50 | R, S | 54, 56 | 6.2, 6.0 | Low, Low |
| MCA Kai'li Dark Waves White 60 | S, X | 68, 69 | 4.1, 4.1 | High, High |
| MCA Tensei 1K Blue 65 | S, X | 65, 66 | 3.9, 3.4 | Mid, Mid |
| MCA Tensei 1K Blue 75 | S, X | 75, 76 | 3.9, 3.4 | Mid, Mid |
| MCA Tensei 1K Black 65 | S, X | 67, 68 | 3.6, 3.5 | High, High |
| MCA Tensei 1K Black 75 | S, X | 76, 78 | 3.6, 3.5 | High, High |
| MCA Tensei AV Series Blue 65 | R | 64 | 5.1 | Mid |
| MCA Tensei Kai'li Blue 60 | S, X | 66, 68 | 4.2, 4.2 | High,High |
| MCA Tensei Kai'li Blue 70 | S, X | 72, 74 | 3.8, 3.8 | High, High |
| MCA Tensei Kai'li White 60 | S, X | 68, 69 | 4.1, 4.1 | High, High |
| MCA Tensei Kai'li White 70 | S, X | 75, 77 | 3.8, 3.7 | High, High |
| MCA Vanquish PL 40 | R2 | 43.5 | 6.8 | Mid/Low |

Project X Denali Black Straight taper mid section provides unmatched feel and maximum energy transfer.

Project X Denali Blue features a stable butt section and low torsional stiffness for stability and confidence throughout the swing

Project X Denali Red Featuring a stable butt-section, for confidence in the hands, with a straight taper mid-section, for a smooth energy transfer, Denali provides a unique blend of stability and feel.

Project X HZRDUS Black Gen 5 the most successful low launch/spin shaft models of the past decade continues to innovate with the addition of our new 4D Optimized Carbon weave. Strategically utilized in the midsection, the part of the golf shaft that undergoes the most stress, and angled for improved torsional resistance.

Project X HZRDUS T1100 HandCrafted widely recognized as the ultimate "spin killer" and the stiffest, lowest-launching, and lowest-spinning profile in the entire Project X line.

Project X Titan Black redesigned the engineering compared to the old HZRDUS generation by swapping out the harsh, rigid butt-section for a more elastic handle profile that progressively stiffens through the mid and tip sections. This change solves the famously boardy feel of past low-spin shafts while retaining elite downrange accuracy.

Project X Titan Yellow design offsets modern, heavy driver heads and allows aggressive swingers to generate higher clubhead speeds without making the club feel heavy or unmanageable.

Project X HZRDUS Blue RDX is a counterbalanced design that features a soft midsection to maximize shaft load and feel while maintaining a stout butt and tip section to keep up with all swing speeds and provide a stable feel through impact.
| Model | Flex | Weight (g) | Torque | Kick Point |
| Project X Denali Black 70 | 6.0, 6.5 | 75, 76 | 3.6, 3.2 | - |
| Project X Denali Black 80 | 6.0, 6.5 | 89, 89 | 3.2, 3.1 | - |
| Project X Denali Blue 60 | 5.5, 6.0, 6.5 | 64, 65, 65 | 3.9, 3.7, 3.5 | - |
| Project X Denali Blue 70 | 6.0, 6.5 | 73, 73 | 3.1, 3.0 | - |
| Project X Denali Red 50 | 5.0, 5.5, 6.0 | 52, 53, 53 | 5.9, 5.4, 5.0 | - |
| Project X Denali Red 60 | 5.5, 6.0 | 60, 60 | 4.5, 4.0 | - |
| Project X HZRDUS Black Gen 5 60 | 5.5, 6.0 | 65, 65 | 3.5, 3.2 | Low, Low |
| Project X HZRDUS Black Gen 5 70 | 6.0, 6.5 | 72, 74 | 3.1, 2.9 | Low, Low |
| Project X HZRDUS T1100 HandCrafted 60 | 6.5 | 67 | 2.3 | - |
| Project X HZRDUS T1100 HandCrafted 70 | 6.5 | 77 | 2.2 | - |
| Project X Titan Black 60 | 6.0 | 67 | 3.5 | - |
| Project X Titan Black 70 | 6.5 | 67 | 3.3 | - |
| Project X Titan Yellow 60 | 6.0 | 67 | 3.5 | - |
| Project X Titan Yellow 70 | 6.5 | 67 | 3.3 | - |
| Project X HZRDUS Blue RDX 60 | S | 64 | - | - |

UST Helium Nanocore Black Ultra High Performance lightweight golf shaft design, featuring our new Nanocore Technology for increased clubhead speed.

UST Lin-Q M40X Blue shafts with increased strength and phenomenal feel. Incorporating M40X into the tip area provides significantly improved lateral stability to the shaft during the golf swing, thereby delivering increased energy to the golf ball at impact.

UST Lin-Q M40X White eliminates the "boardy" feel through the use of proprietary nano technology and nanoalloy used in the prepreg matrix resin. This novel combination significantly improves shaft feel and performance.

UST Lin-Q Powercore Blue The innovative combination of Q Ply material, a nano resin system and discrete profile design technology provide unrivaled launch consistency, stability and perfect feel.

UST Lin-Q Powercore Red shaft series with increased strength and phenomenal feel. Designed from the inside out, each launch/flex profile is fabricated with a distinct mandrel, materials and layup patterns.

UST Lin-Q Powercore White The nano-structural influences of the resin system combined with the Q Ply material provides the most efficient fiber material available.
| Model | Flex | Weight (g) | Torque | Kick Point |
| UST Helium Nanocore Black 40 | Light | 45 | 6.3 | - |
| UST Helium Nanocore Black 50 | R | 55 | 5.7 | -, Low, - |
| UST Lin-Q M40X Blue 6 | S, X | 66, 67 | 4.8, 4.7 | - |
| UST Lin-Q M40X Blue 7 | S, X | 74, 76 | 4.1, 4.1 | - |
| UST Lin-Q M40X White 6 | X | 67 | 4.8 | - |
| UST Lin-Q M40X White 7 | X | 75 | 4.0 | - |
| UST Lin-Q Powercore Blue 6 | S, X | 69, 73 | 3.8, 3.8 | Mid, Mid |
| UST Lin-Q Powercore Red 6 | S, X | 66, 69 | 3.6, 3.6/td> | High, High |
| UST Lin-Q Powercore White 6 | S, X | 67, 70 | 3.6, 3.6 | Low, Low |
| Model | Image |
| GP 2G Tour Wrap Black .60 | ![]() |
| GP 2G Tour Wrap Red .60 | ![]() |
| GP 2G Tour Wrap White .60 | ![]() |
| GP CP2 Pro Red .60 | ![]() |
| GP CP2 Pro Wrap Blue .60 | ![]() |
| GP MCC Align Blk/White | ![]() |
| GP MCC Plus4 Align Grey | ![]() |
| GP MCC Plus4 Blue .60 | ![]() |
| GP MCC Plus4 Grey .60 | ![]() |
| GP New Dec MCC Blk/Blue | ![]() |
| GP New Dec MCC Blk/Red | ![]() |
| GP New Dec MCC Blk/White | ![]() |
| GP MCC Plus4 BlkGrey | ![]() |
| GP MCC Plus4 DrkOrgWht | ![]() |
| GP MCC Plus4 DrkRedWht | ![]() |
| GP MCC Plus4 GrnGold | ![]() |
| GP MCC Plus4 GryRed | ![]() |
| GP MCC Plus4 LtBluWht | ![]() |
| GP MCC Plus4 NvyOrg | ![]() |
| GP MCC Plus4 NvyRed | ![]() |
| GP MCC Plus4 PurpWht | ![]() |
| GP MCC Plus4 RoyalWht | ![]() |
| GP Tour Velvet 360 .58 | ![]() |
| GP Tour Velvet 360 ZipCore | ![]() |
| GP Tour Velvet Align | ![]() |
| GP Tour Velvet Full Cord .58 | ![]() |
| GP Tour Velvet Plus4 | ![]() |
| GP Tour Wrap MicroSuede Under Size | ![]() |
| GP Z Cord Midsize | ![]() |
| GP ZGRIP Cord | ![]() |
| Model | Image |
| Iomic Hideki Grip | ![]() |
| Iomic iXx 2.3 Red/Blk | ![]() |
| Iomic Sticky 2.3 Blk | ![]() |
| Model | Image |
| JumboMax JMX Ultralite | ![]() |
| Model | Image |
| Lamkin Crossline | ![]() |
| Lamkin Crossline 360 Genesis | ![]() |
| Lamkin Crossline Full Cord | ![]() |
| Lamkin ST Soft Womens | ![]() |
| Model | Image |
| SS Crossline 2.0 Blk. Std | ![]() |
| SS Crossline 2.0 Gry. Std | ![]() |
| SS REVL Comfort Blk Std | ![]() |
| SS REVL Element Blk Std | ![]() |
| SS REVL Player GryBlue Std | ![]() |
| Model | Image |
| TT Icon 360 Blk Std |
| Model | Image |
| Winn Dri-Tac | ![]() |
| Winn Dri-Tac Gray | ![]() |
| Winn Dri-Tac Lite | ![]() |
| Winn Excel | ![]() |
| Club Head Volume | Club Length | Headcover | Wrench | Interchangeable Shaft | MSRP |
| 460cc | 45.75" | Yes | Yes | Yes | $549.99 |