MultiControl Standard Battery-Powered Accessory Controller - MCST

The MultiControl Standard gives you flexible, battery-powered control for compatible 12V accessories in coops, sheds, garages, trailers, and other everyday applications. Use the two command outputs to operate connected devices from the control board, included push-button or a wired input. The system supports AC transformer or solar charging, helping you build a dependable setup for locations with or without nearby utility power.

·        Off-Grid Ready - Pair with a compatible battery and solar panel to operate accessories in remote locations without access to AC power

·        Flexible 12V Accessory Control - Operates compatible 12V accessories through two independent command outputs

·        Flexible Battery-Powered Operation - Supports AC transformer or up to 30 watts of solar charging for use with or without nearby utility power.

·        Push Button Control – Operate using the included wired push-button or your own wired momentary input for convenient local operation

·        Expandable System - Compatible with available MultiControl lighting, coop arm, and MultiConnect accessories

·        Straightforward Installation - Designed for DIY setup using common low-voltage wiring and basic tools

Product Details

Create a customized low-voltage control system with the MultiControl Standard. The weather-resistant control box houses the MultiControl board and provides two command channels for compatible 12V accessories. Use the included wired push button or another compatible momentary input for local control. A 12V battery is required for operation, and the battery can be maintained with a compatible Ghost Controls AC transformer or a solar panel rated up to 30 watts. Add compatible MultiControl accessories as your application grows.

What's Included

Main Components

MultiControl Standard control box

MultiControl control board

Battery wiring harness

3 ft. low-voltage wire

AXPB Wired Push Button

Installation Hardware

Control box mounting hardware

Strain-relief fittings

Requirements

·        Requires a 12V deep-cycle marine battery, sold separately. A compatible AC transformer or 10W to 30W solar panel is required to maintain the battery.

·        Designed for 12V DC intermittent-use accessories only. Not intended for continuous power draw from devices such as continuously operating fans or pumps.

·        Includes two outputs rated up to 3 amps each and supports up to four compatible devices total, with two devices per output using proper parallel wiring.

·        MultiControl is a standalone accessory controller and does not replace or connect to a Ghost Controls gate opener control board.

·        Lights, coop arm, powered accessories, low-voltage wire, and the Ghost MultiConnect Kit are sold separately.

·        Solar charging performance depends on accessory load and frequency of use. It may not sustain multiple devices under continuous draw.

Compatible Accessories

AXDP 10-Watt and AX30 30-Watt Solar Panels

AXTF Resettable Transformer

MCIA MultiControl indoor LED light kit

MCOA MultiControl outdoor LED light kit

AXMC-R Ghost MultiConnect kit for app-based control

MCCAW Coop Arm Assembly Kit

Warranty

12-month warranty