Heated Vest Liner Gen-X4 delivers fast, even warmth for motorcycle, snowmobile, and ATV riders with 12V or portable-battery power options.
- The Heated Vest Liner Leverages ZEPTO® fibre technology; made in France, these heating fibres are so thin you wouldn't be able to notice them if not for their tremendous heat output
- ZEPTO® fibres are lighter and heat up faster than the heating wire in our Gen-X3 line of heated clothing
- Ergonomically designed to hug the contours of your body
- Uniform heat delivered all over the front, back, and collar
- Two easily accessible side pockets on the front of the vest to keep a wallet or other essentials
- Anti-bacterial, breathable, and water-resistant fabric
- The bottom edge of the vest lands just above the beltline, thus maintaining your range of motion
- Pairs seamlessly with our heated gloves or glove liners (see required wiring table below for more info on this)
- This vest liner is designed to be worn on top of a T-shirt and underneath a motorcycle or winter jacket.
- One Coax Battery Cord (SKU 100227-1)is included
Please see the table below and determine what scenario applies to you. The required wiring must then be added to your cart, as it is sold separately.
| Scenario | Required Wiring |
|---|---|
You plan to power this heated vest from your powersport vehicle's 12V battery AND won't use any other heated clothing BUT you're okay with simple ON/OFF for the vest's heat. |
|
| You plan to power this heated vest from your powersport vehicle's 12V battery ANDwon't use any other heated clothing AND want to fine-tune the temperature. |
Single Temperature Controller (SKU 100230-1) If you foresee adding heated gloves or glove liners down the road, then you should purchase the dual temperature controller instead. |
You plan to power this heated vest from your powersport vehicle's 12V battery AND want to use heatedgloves or glove liners AND want to fine-tune their temperature independently of the vest. |
Dual Temperature Controller (SKU 100231-1)ANDSnap-on Harness (SKU 100226-1) |
You want to power this heated vest from your powersport vehicle's 12V battery AND want to use the GEARS Gen-X4 Heated Leg ChapsAND want to fine-tune the temperature of the vest and the chaps BUT are okay with them being the same temperature. |
|
You want to power this heated vest from your powersport vehicle's 12V battery AND want to use heated socksORinsolesWITHOUT heated leg chaps BUT are okay with the vest being the same temperature as the footwear. |
Single Temperature Controller (SKU 100230-1) AND Y-switch-cord for Heated Socks/Insoles (SKU 100233-1) If you foresee adding heated gloves or glove liners down the road, then you should purchase the dual temperature controller instead. |
You want to power this heated jacket from your powersport vehicle's 12V battery AND want to use heated socksORinsolesWITHOUT heated leg chaps AND want to fine-tune the temperature of the jacket and the footwear independently of each other. |
Dual Temperature Controller (SKU 100231-1) AND Y-switch-cord for Heated Socks/Insoles (SKU 100233-1) If you connect heated gloves or glove liners to the connection points behind each shoulder, then the vest and the footwear will be at the same temperature, and the gloves can be at a separate temperature. |
You want to power this heated vest from the ZR8 or ZR5 Heated Clothing Portable Battery |
No additional wiring is required. |
You want to power this heated vest using a Portable Battery KitAND want to connect heatedgloves or glove liners to the connection points behind each shoulder. |
Male Coax to Dual Female Coax Adapter (SKU 100229-1)ANDSnap-on Harness (SKU 100226-1) |
Click here to view the instruction sheet in a new tab
FAQs
Q: What are the specs?
A: The vest produces 53 watts of heat and draws 3.9 amps of current (tested when the engine was idling).
-----------
Q: Will this work alongside other brands of heated clothing?
A: Yes! All our heated clothing is compatible with Firstgear, Gerbing, Warm & Safe, Tourmaster, and Venture Heat. You may need an adapter such as our SKU 100386-1 or 100389-1.
-----------
Q: What is the difference between Gen-X3 and Gen-X4?
A: Gen-X3 uses a copper-based heating element (made in the USA), whereas Gen-X4 uses Zepto fibers (made in France). Thus, Gen-X4 heats up faster, generates more heat, and is lighter. Both are amazing products, but Gen-X4 is just a little bit of an upgrade!
-----------
Q: How do I wash and dry this heated apparel?
A: It can only be machine washed if your washing machine has a hand wash cycle. Please note that the hand wash cycle is typically only available on newer washing machines. If your machine does not have a hand wash cycle, then you must manually wash by hand. For drying, you can only hang dry. Do not use a drying machine.
-----------
Q: My powersport vehicle has an SAE lead installed on its 12V battery, intended for connection to a trickle charger or battery maintainer. Is it possible to use this SAE lead to bring power to my heated clothing?
A: Yes! You just need to buy the SAE to Female Coax Adapter (SKU 100252-1). Using this adapter eliminates the need for the Coax Battery Cord (SKU 100227-1).
-----------
Q: My powersport vehicle has a female cigarette lighter socket, also referred to as a 12-volt accessory outlet. Is it possible to power my heated clothing from this socket instead of a direct connection to the vehicle's battery?
A: Yes! You just need to buy the Male Cigarette Lighter Plug to Female Coax Adapter. (SKU 100224-1). Using this adapter eliminates the need for the Coax Battery Cord (SKU 100227-1).
Connecting Various Articles of GEARS Heated Clothing
Optional Portable Battery Add-on
Consider purchasing one of our Heated Clothing Portable Battery Kits if you'd like to use your heated vest when you get off your vehicle. In other words, a portable battery will allow you to use this vest while skiing, snowboarding, or just taking a walk on a cold day. You won't need to use your temperature controller when you're using the portable battery because there are buttons on the battery to adjust the temperature. If you plan on connecting heated gloves or glove liners via the snap points behind each shoulder, then you will need to purchase the Male Coax to Dual Female Coax Adapter (SKU 100229-1).