Solution 2.3-I Wood Insert by Enerzone

The Solution 2.3-I pairs a 2.4 ft³ firebox with a high-power, heat-activated 144 CFM blower positioned to move heat out of the firebox and into the room rather than up the flue. It is the mid-size choice in the Enerzone insert line, and the one most standard masonry fireplaces will take.

It is designed to suit a faceplate covering a masonry hearth up to 32" high and 50" wide. Faceplate trims come in black, brassy gold and nickel, and can be coordinated with the door overlay.

Features

• 2.4 ft³ firebox lined with refractory bricks for better heat distribution
• 144 CFM heat-activated blower included
• Single glass door with a cast iron frame
• Glass air-wash system keeps the viewing area clear
• Stainless-steel secondary-air system improving gas combustion
• Non-catalytic combustion — nothing to replace every few seasons
• EPA 2020 certified
• Faceplate trims in black, brassy gold or nickel, coordinating with the door overlay

Will it fit?

An insert sits inside your existing fireplace, so measure the masonry opening before ordering — the minimum is listed in the specifications below. A faceplate covers a hearth opening up to 50" wide by 32" high. A stainless liner is required and is not included; check your flue height as well.

What's included

• Solution 2.3-I wood insert
• 144 CFM blower
• Owner's manual

Warranty

Limited lifetime warranty (see owner's manual). Don't forget to complete your warranty registration.

Installation and Operation Manual

The information on the certification label affixed to the appliance always overrides information published in any other media, including this page, the owner's manual, catalogues and flyers.