-
Clipless Tube-Frame Body
- Lightweight tube frame
- Accessory panels available (sold separately)
- Interior with driver figure
- Hidden clipless latch in the rear
- Bosses for accessory light kits (sold separately)
-
3s Brushless Electronic Speed Control
- Delivers precise throttle control
- LiPo overvoltage protection
- Two-stage low-voltage detection
- Three drive profiles
- Sport Mode — forward / brake / reverse
- Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral
- Crawl Mode — forward / instant reverse - no neutral with 100% hill holding brake
- 6-volt BEC
- More torque and low speed control than conventional designs
- 3350 Kv
- Laser-etched motor can
- TQ Compact 2-channel transmitter
- Removable color-matched grip adapter
- High-output signal delivers outstanding range
- Compact receiver with servo and LED channels
-
Molded Monocoque Chassis
- Single piece composite design
- More torsional rigidity than conventional ladder frames
- Reduces weight
- Battery and ESC held low in the chassis
- Mounted on opposite sides for better weight distribution
- Integrated rock light mounding and wire routing
- Single piece composite design
-
Driveline
- Full-time shaft-driven 4-wheel drive
- Locked axles with steel-spool gears
- Steel axle shafts and U-joints
- 25% overdrive front axle
- Heavy-duty CV center driveshafts
- Single speed transmission
- All metal gears
- Full ball bearings
-
Portal Axles
- Increases center ground clearance
- Reduces torque twist
- All metal gears
- Full ball bearings
-
Suspension
- Lay-down shock design
- Triangulated 4 link front and rear
- High-clearance lower links
-
Steering
- Superior 60° steering angle
- Waterproof high-torque 2265 servo
- Full metal gears
- 75 oz-in torque
- Aluminum center section
- Horizonal servo mounting
- High-throw metal servo horn
- High-clearance drag link
- Direct steering (no servo saver)
-
Oil-Filled Aluminum GTM Pro Shocks
- Aluminum bodies in bright anodized colors
- Realistic body-over-shock appearance
- O-ring sealed with smooth controlled damping
- Easily refreshed with available rebuild kits
-
Wheels and Tires
- 1.3” Licensed Method Race Wheels®
- 3-piece Beadlock design
- 7 mm wheel hex
- 1.3” x 2.8” Stone Claw™ tires
- High-grip rubber compound
- Aggressive stepped block tread design
- Wide directional sipes
- 1.3” Licensed Method Race Wheels®
-
Battery and Charger Included
- 3 -cell LiPo battery with iD®
- 11.1 volts
- 250 mAh capacity
- USB-powered charger
- iD technology for faster, safer charging
- 3 -cell LiPo battery with iD®
- Sealed Ball Bearings
- Durable Hex Hardware
Launch DateOctober 13, 2026
Days In Market7
VendorTRAXXAS
Variants5