Introducing the Shark WANDVAC System WS640, a high-powered and lightweight 3-in-1 cordless vacuum cleaner designed for versatile cleaning. Effortlessly handle above-floor cleaning tasks with the hand vac or wand mode, or quickly switch to stick vacuum mode to effectively clean floors and carpets. This system includes a sleek charging and storage base, HyperVelocity accelerated suction power, and a PowerFins brushroll for thorough dirt and debris removal.

Enhanced & Lightweight Vacuum: Featured with enhanced HyperVelocity accelerated suction power, this Shark WS640 vacuum delivers exceptional cleaning performance by efficiently eliminating dirt and dust from your home or office carpets. Due to its sleek charging base and cordless design, our lightweight WS640 vacuum remains constantly charged so that it\'s always ready whenever you need it.

Conveniently Clean Anywhere: Consist of 3 detachable parts, our 3-in-1 Shark WANDVAC vacuum can be flexibly assembled into various formations you need, making it cater to floor cleaning tasks, above-floor works and hard-to reach area ceiling and walls. With its convenient one-touch switch between cleaning modes, it effortlessly adapts to different surfaces, leaving no corner untouched.

Advanced Deep-Cleaning Technology: Unique innovative PowerFins technology ensures continuous contact with surfaces for deep carpet penetration as well as direct engagement with floors, guaranteeing thoroughness and efficiency in every clean.

Hair Wrap Prevention: Equipped with a self-cleaning brushroll mechanism, this Shark WS640 vacuum cleaner effectively prevents hair wrap during operation, ensuring consistently smooth and efficient performance throughout your entire cleaning experience. Perfect vacuum for pet-keepers and family use.

Hygienic One-Touch Dust Cup Empty: Come with the convenient One-Touch Hygienic Dust Cup Empty feature, this advanced WS640 vacuum allows quick and hassle-free emptying of the dust cup without creating any mess on hands, bringing not only an efficient but also a hygienic overall user experience.

Q&A:
Q1: What do the three lights on the hand vacuum mean?
A1: The lights on the hand vacuum show the remaining charge in the battery. The lights will also blink and illuminate to show the status of the battery while charging. In addition, the lights will illuminate in certain configurations to inform you of any issues with the hand vacuum or nozzle.

Q2: The battery has low runtime. What should I do?
A2: The initial battery charge is approximately 30%. Before first use, charge the battery completely. A full charge takes approximately 3.5 hours.
Note that battery runtime is affected by the type of cleaning the vacuum is used for. Vacuuming on high pile carpet will reduce battery runtime quicker than vacuuming bare floors.
If you have more than one battery, it is recommended that you use and charge them equally.

Q3: What if the battery is warm to the touch or indicates that it\'s too warm to charge?
A3: Your battery may feel warm in use as air passes through the vacuum. If it feels uncomfortably warm, stop using the vacuum and allow the battery to cool. Batteries can get warm from use, which is not optimal for charging. When this occurs, the charger will wait for the battery to cool before it begins charging.

Q4: When and how do I clean the dust-cup, filters, and cyclone?
A4: Filters may need to be cleaned if the vacuum stops picking up dirt, if airflow is restricted, or if you notice lighter or no suction. For optimal performance, clean filters regularly. Between cleanings, lightly tap filters over a trash receptacle to remove dust and debris as needed.
Rinse the fabric filter once monthly, or as needed.
• To access the fabric filter, first eject the dust cup, then press the filter release latch to remove the filter housing.
• Press the tabs on the orange frame of the filter to gently remove it from the filter housing.
• Tap clean.
• Rinse filter with water only.
• Allow filter to air-dry completely (at least 24 hours) before reinstalling.
• To reinstall, slide the filter back into the filter housing, press the housing back into place, then close the dust cup.
Rinse the pre-motor filter in the dust cup every 12 months, or as needed.
• To access the pre-motor filter, lift the door on the left side of the auto-empty dock and pull the filter up and out of the dock
• Tap clean
• Rinse filter with water only.
• Allow filter to air-dry completely (at least 24 hours) before reinstalling.
• To reinstall, slide the filter back into the filter housing, then close the filter door.

Q5: When and how do I empty the dust cup?
A5: For optimal performance, empty the dust cup each time you vacuum.
With the power switch off and the hand vacuum positioned over a trash can, slide the dust cup release button (underneath the power button) forward. The dust cup door will drop open. Tap gently to empty contents. Wipe the dust cup and the mesh screen inside lightly with a dry cloth to remove dust and dirt. Close the dust cup door, pressing it until it clicks into place.

Q6: I was wondering if there was a charging cord included so I may charge the handheld wand while away from the charging dock?
A6: We would like to let you know that this unit can be charged while on the dock or with the charging cord attached to the hand vacuum.

Q7: How do I store my vacuum?
A7: Place the unit on the charging dock, with the hook on the back of the wand hanging on the charging post.
Make sure the contacts on the wand are aligned with the contacts on the charging post.
A second option is to plug the charging port directly into the hand vacuum. Unplug the cord from your charging dock and connect it to the port in the hand vac nozzle.

Q8: How do I clean above the floor with or without accessories?
A8: To clean with the hand vacuum, detach it from the wand. Press the release buttons on both sides of the handle and lift the hand vac off the wand.
For more cleaning reach, leave the hand vacuum attached to the wand, and detach the wand from the floor nozzle. Press the nozzle release button on the bottom of the wand, then gently pull up on the hand vac to remove the nozzle.
Attach an accessory to the nozzle opening in the hand vacuum or the wand opening and begin cleaning. To detach accessories from the hand vacuum, press the one-touch release buttons. To detach accessories from the wand, press the nozzle release button.

Brand: Shark
Product Type: Shark WANDVAC WS640 Vacuum
Material: ABS
Color: Blue
Power: 120W
Voltage: 14V
Charging Time: 4H
Power Supply: 1PC Rechargeable Battery
Bin Capacity: 0.13 Fluid Ounces
Item Size: 29.46x28.44x111.76cm/11.6x11.2x44in
Item Weight: 2.67kg/5.9lbs
Package Size: 16.5x22.5x5in
Package Weight: 9.4lbs

1x WS640 Vacuum
1x Charging Dock
1x Duster Crevice Tool
1x User Manual