Brand: FORENSICS DETECTORS
Model: FD-600-CO2-O2-INC
Data Logging: Click Here
User Manual (PDF): EN | DE | FR | ES | IT |
Application Guide: Blog explanation
Features:
- 🎆 INCUBATOR ANALYZER: CO2 (NDIR sensor) and O2 (electrochemical sensor) incubator analyzer. Comes FACTORY-CALIBRATED. Turn ON and GO.
- 🌈 COLOR: Color screen and graph functions allow for intuitive operation.
- 📲 DATA LOGGING: USB recharging and real-time computer data acquisition.
- 💪 STRONG: Shockproof, water-resistant, dustproof, and explosion-proof.
- 🕵️ TRUSTWORTHY: 1-year limited warranty. Arrives with a signed and dated calibration certificate.
Details: Our incubator analyzer detects CO2 and O2 gas and is an easy-to-use solution for incubator gas-level verification. This unit will verify the O2 and CO2 levels in your incubator to make sure your incubator is operating to specifications. Based on our industrial analyzer platform, this analyzer includes a built-in pump that is easy to use and very portable. Insert the tube into your incubator sample port and the other end into the analyzer. Ensure there is a moisture filter in-line to reduce errors caused by the high humidity in the incubator. Within 60 seconds, you will be able to determine the levels of O2 and CO2 in your incubator. Comes with a color screen, large digits, and on-screen real-time graphing. The detector is constructed with an advanced electrochemical oxygen sensor. The internal 32-bit microprocessor allows for user calibration, ON/OFF flow, and test control.
Which CO2 Gas Monitor shall I purchase for my incubator?
It all depends on your incubator. For example:
- If your incubator has a sample air port, then you need the FD-600-CO2-O2-INC. This analyzer has a built-in pump and will draw the air from the incubator to the analyzer. This is the ultimate and best, most accurate way to test.
- If your incubator does NOT have a sample air port, but does have a glass window door, you can use the FD-90A-CO2 (10%) and place the CO2 monitor in the incubator. Versatile, but not as accurate as using the FD-600-CO2-O2-INC as explained in step 1.
- If your incubator does NOT have a sample air port and does NOT have a glass door window, then you will need to engineer access to the incubator and use the FD-600-CO2-O2-INC so the analyzer can draw the air from the incubator to the analyzer for gas analysis.
Included: Incubator analyzer and magnet back, User manual, certified calibration certificate, USB charging cable, Tube and Barb Coupler, in-line moisture filter, USB charger, and tubing.
Calibration Options:
1. Professional Calibration: Serviced by Forensics
2. Calibration Guide: Calibrate It Yourself
Calibration Kit (needed to calibrate yourself - sold separately):
Calibration Gas (CO2 balanced in N2)
Calibration Gas Regulator (C10)
Bump Gas (CO2 balanced in N2)
Calibration T-piece & Tubing
Accessories and Parts (sold separately):
Gas Sensor Replacement (O2)
Gas Detector Waterproof Case
Gas Detector Stand
Specifications
Oxygen (O2) Detection: 0 - 30% with 0.01% resolution (electrochemical sensor cell)
Carbon Dioxide (CO2) Detection: 0 - 10% with 0.01% resolution (NDIR sensor)
Gas Sensor Life: 2 - 3 years (O2 sensor), > 5 years (CO2 sensor)
Sampling Type: Pumped (built-in sampling pump)
Recommended Calibration Period: 12 months
Datalogging: Yes (🛠️ Setup Guide)
Error: ≤ ± 3% F.S.
Response Time: ≤ 60 sec
Store / Operating Temp: 0 to 122°F (−18 to 50°C)
Store / Operating Humidity: <95%RH
Battery: DC3.7V Li-ion battery, 3200mAh
Explosion Rating: ATEX certified Ex ia IIC T4 Ga (📋PDF)
Weight: 11 oz (314 g)
Dimensions: 5.9 × 2.6 × 1.8 inches (14.9 × 6.6 × 4.6 cm)
Charge Time: 4 hours
Operating Time: > 10 hours
Pump Rate: 0.3 LPM - 0.5 LPM (300 - 500 cc/min)
Alarm: LED, Buzzer, and Vibration
Calibration Location (USA): Los Angeles, California, USA
Calibration Standard (USA): USA NIST Traceable Gas Source
Calibration Location (Europe): Athens, Greece
Calibration Standard (Europe): European NPL Traceable Gas Source