A 3D printed Large Heart Shaped Name Stands, Heart Shaped Place Holder Display, Red Heart Seating Name Holder, Large Heart Wedding Table Holder (for wedding tables / party and event seating) made with PLA filament. PLA is a fully biodegradable thermoplastic polymer consisting of renewable raw materials.

These are NOT metal. Photos of other stands used are just examples of colour options available.

Dimensions:

Height - 4.8 cm (48 mm)

Width -  4.8 cm (48 mm)

The stand is 4.8 cm height by 4.8 cm width (48 mm by 48 mm / under 2 inches by under 2 inches inches approx) and is 3 mm thick (across widest points) and the base is 3 mm thick and 3.8 cm by 4 cm in area size. There is a prong at the rear that supports the card. Not suitable for events outside as they will blow over.

The front of the holders have a smooth finish. The holder works better with card that is under 8 inches in height.

This is for the holder only - the cards are for display purposes. The card used in the photos is sized 5.75 inches width by 8.25 inches height and is 200 gsm, (15 cm / 150 mm by 21 cm / 210 mm). Please see photos for details. (Please Note - Actual colours may vary. This is due to the fact that every computer monitor has a different capability to display colours and that everyone sees these colours).

This is not a toy and cannot be placed in a dishwasher. Hand wash and wipe clean only.

**The material is PLA filament. "PLA plastic or polylactic acid is a vegetable-based plastic material, which commonly uses cornstarch as a raw material. It is the primary natural raw material used in 3D printing. PLA is a fully biodegradable thermoplastic polymer consisting of renewable raw materials."***