A 3D printed Large Star Wedding Name Stand (for wedding tables / party seating) made with plastic PLA filament.

These are NOT metal. Photos of other stands used are just examples of colour options available.

Dimensions:

Height - 4 cm (40 mm)

Width - 7.3 cm (73 mm)

The stand is 4 cm height by 7.3 cm width (40 mm by 73 mm / 1.5 inches by 3 inches approx) and is 3 mm thick (across widest points) and the base is 3 mm thick and 3.5 cm by 2.5 cm in area size. There is a prong at the rear that holds the name card in place.

The front of the holders have a smooth finish. The holder works better with card that is under 6 inches in height.

This is for the holder only - the cards are for display purposes. The card used in the photos is sized 5 inches width by 6 inches height and is 200gsm, (12.5 cm / 125 mm by 15.8 cm / 158 mm) or thinner width 3 inches width by 6 inches height (8 cm / 80 mm by 15.5 cm / 155 mm). Please see photos for details. (Please Note - Actual colours may vary. This is due to the fact that every computer monitor has a different capability to display colours and that everyone sees these colours)

This is not a toy and cannot be placed in a dishwasher. Hand wash and wipe clean only.

**The material is PLA filament. "PLA plastic or polylactic acid is a vegetable-based plastic material, which commonly uses cornstarch as a raw material. It is the primary natural raw material used in 3D printing. PLA is a fully biodegradable thermoplastic polymer consisting of renewable raw materials."***