The Monroe Glass Chandelier celebrates classic glass lighting and brings an inviting ambiance to any space through its clear bell-shaped glass shades and multi-arm frame. Available in three or five arm configurations, choose the scale that suits your space. Its a perfect match for classic, Hamptons, or contemporary interiors. A Fat Shack Vintage exclusive.

Features:

• Bell-shaped clear glass shades lend a classic, sophisticated finish
• Symmetrical multi-arm fixture in three styles for greater illumination
• Tiltable lampholders allow directional illumination - tilt up, down or anywhere between
  
  

 About the Monroe Glass Chandelier:

• Combining classic proportions with clean detailing, it transitions seamlessly between modern and traditional settings.
•  When lit, the gently scalloped bell shades catch and refract the light, creating a sparkling crystalline effect.
• The glass shades are pressed glass. Bubbles, lines, slight surface imperfections or discolouration are characteristics of all pressed glass. They are not considered defects.
  
• The triple arm steel frames are available in Black or Gold/Brass finishes.
  
• The black steel frame is also available in a five arm variation.
  
• The steel fixtures feature 180° swivel lamp holders to adjust upwards and downwards.
• To adjust the lamp holder the wing nut screw needs to be loosened slightly. The lamp holder is not to be adjusted with the wing nut still tightened in place.
• The steel chandelier is supplied with two poles in the box. Each pole is 400mm in length. During installation, this fitting can be used with 1 pole or 2 poles. This allows drop length choices of 590mm or 990mm. These measurements are approx. from the ceiling to the tip of the lamp holders. If you would like drop lengths greater than 990mm, simply contact us to arrange.
• The steel chandelier attaches to the ceiling via a hook hanger which is secured in the ceiling and then the ceiling cap covers the hole. 
• The lamp holder takes a standard bayonet (B22) light bulb, max 40W.