Perfect add-on for our Big Bore kits and exhaust systems. Increase power throughout the RPM range utilizing 18mm carburetor. Includes all required hardware for easy installation right down to a jet assortment for fine tuning..
These carb kit will also work great on a 1988-1999 Honda Z50R using 7/8" handlebars.
Choose your kit.
420-HXR-5003 includes just the manifold for use with stock XR/CRF50 heads.
420-HXR-5004 includes just the manifold for use with aftermarket big valve heads or the stock XR/CRF70 head.
- 18mm Carb
- Special manifold sized for the CRF/XR50 head
- Special manifold sized for the big valve heads (XR70 and aftermarket)
- Includes gaskets and bolts
- Includes throttle and cable
- Includes 5 main jets and 3 pilot jets
Application Note: This 18mm Carb Kit is not recommended for use on stock displacement CRF50's. Recommended for 82cc or larger displacement motors.
Note: The throttle in this kit is for standard 7/8" diameter handlebars. The stock Honda XR/CRF50 uses 3/4" diameter handlebars. You must use a handlebar kit that changes to 7/8" diameter handlebars to use this throttle. BBR does not make or sell any throttles for 3/4" handlebars
Note #2: This kit does not include an air filter and will not work with the OEM Honda CRF/XR50 air filter. See the UNI filter we recommend (BBR part number 430-HXR-5002) below in the Optional Parts section.
BBR General Jetting Guidelines Chart