Application Instructions:

Using a house Iron:
*********Avoid steam by making sure there is no water in the iron.********

Heat Preparation: Set your iron to the cotton setting, approximately 350°F, for optimal results.

Fabric Compatibility: Ensure the garment or item you’re applying the patch to can endure the application
temperature. Perform a heat test beforehand. We cannot be held responsible for damage caused by unsuitable fabric or incorrect application methods.

Moisture Removal: Preheat the application area by ironing it for five minutes. This step helps remove any moisture from the garment, ensuring better adhesion.

Protection Layer: Place a protective cloth over the patch before ironing. Avoid ironing directly on the patch.

Secure Application: Press down firmly on the patch with the iron for 30–45 seconds. If preferred, you may sew the patch in place instead of ironing.

Final Seal: Allow the patch to cool, then turn the garment inside out and iron the reverse side for an additional 30 seconds to secure the bond.

Heat Press: (heat press temp may vary)
1) Set your heat press between 315F - 350 F
2) Place patch on desired location of garment and cover with a protective covering or a Teflon sheet to protect the patch from damage.
3) Press for 15-20 seconds
4) Turn the garment over and press the other side for an additional 7-10 seconds
5) Let your item cool