Anjon 3" Double-Sided EPDM Seam Tape

Anjon’s 3" Double-Sided EPDM Seam Tape creates a strong, watertight bond between two pieces of EPDM pond liner. Compatible with both LifeGuard® 45 Mil and 60 Mil EPDM pond liners, this black butyl rubber tape is designed specifically for field seaming and liner repairs — the same material as the liner itself for a reliable, long-lasting connection.

Primer is required for proper adhesion. The tape and liner surfaces must be primed before application to allow the materials to fully vulcanize together. EPDM Seam Tape Primer is sold separately.

Available Lengths:

• 3" × 25'
• 3" × 50'
• 3" × 100'

How to Use

1. Clean both liner surfaces thoroughly and allow to dry
2. Apply Anjon EPDM Primer to both surfaces in the seam area; allow to tack (approximately 15–30 minutes)
3. Center the tape over the seam line and press firmly into place
4. Roll with a hand roller to eliminate air pockets and ensure full contact
5. Allow to cure for 24 hours before filling the pond

Primer not included. For best results, always use genuine Anjon primer and tape together.