Bluetooth Managed Proximity Access for Gates and Doors

The Security Brands 27-220 Edge E2 SecurePass is a smart prox reader and stand-alone access control unit for gated entrances, doors, parking areas, and controlled perimeter access points. It includes a Security Brands SecurePass CR metal proximity reader, Bluetooth administrator app management, onboard relay control, and local programming through the included internal programming pad.

The 27-220 can operate without a separate access controller. It stores credentials, checks user permissions and schedules, and activates Relay A or Relay B when an approved SecurePass credential, transmitter, remote, vehicle tag, or connected Wiegand device is used. This makes it useful for single-entry locations or two controlled openings where the reader and controller are needed at the access point.

For multi-entry properties, the Edge family also supports a controller-based approach. The Security Brands Edge E4 27-240 is the dedicated smart door controller in the same product family, designed for layouts where separate Wiegand readers, keypads, or access devices are wired back to a controller. The 27-220 is the all-in-one smart prox reader option, while the Edge E4 is the controller option for system layouts that need separate reader placement.

In a typical gate installation, the 27-220 is powered by the included 12-VDC power supply or a compatible 12 to 24VAC/DC source. Relay A is commonly wired from N/O and COM to the gate operator’s open, radio, access, or similar input and common terminal. Relay B can be wired the same way to a second gate, door, lock control circuit, or access device. Exact terminal names vary by operator, so the gate operator or door opener wiring diagram should always be followed.

Key Features

• Smart prox reader and stand-alone access controller
• Security Brands model 27-220 Edge E2 SecurePass
• Includes Security Brands SecurePass CR metal proximity reader
• Operates without a separate controller for stand-alone gate or door access
• Controls up to 2 gates, doors, or access points
• Relay A and Relay B outputs for direct connection to gate operators, door openers, locks, or control circuits
• Bluetooth connection for local administrator app management
• Edge Smart Keypad app available for iOS and Android administrator use
• Direct programming through the included internal programming pad
• 26-bit Wiegand protocol support
• 1 available Wiegand input for compatible external Wiegand devices
• 2 event inputs for request-to-exit and related input functions
• 2 digital inputs for accessory input functions
• Dual 365-day timers, one for each relay
• Supports 7-day, holiday, and special-event timer functions
• Configurable user permissions for credentials and connected reader devices
• Event reports with CSV export
• Anti-passback support
• Random code generation
• Firmware updates through the app when available
• Stainless-steel faceplate
• Powder-coated steel enclosure
• Made in the USA from global materials

Technical Specifications

• Manufacturer: Security Brands
• Model / Part Number: 27-220
• Product Name: Edge E2 SecurePass
• Product Type: Smart prox reader and stand-alone access controller
• Reader Type: Security Brands SecurePass CR metal proximity reader
• Access Control Type: Local stand-alone access control with onboard relays
• Separate Controller Required: No for stand-alone operation
• Edge Family Controller Option: Security Brands Edge E4 27-240, used when separate Wiegand readers or keypads need to wire back to a controller
• Cloud / Cellular Control: No
• Administrator App: Edge Smart Keypad app
• App Connection: Bluetooth
• Direct Programming: Included internal programming pad
• Controlled Openings: Up to 2 gates or doors
• Relay Outputs: Relay A and Relay B
• Relay Contact Rating: 10A at 120VAC / 24VDC
• Typical Gate Wiring: Relay N/O and COM to gate operator open, radio, access, or similar input and common
• Second Device Wiring: Relay B can be wired to a second gate, door, lock control circuit, or controlled device
• Wiegand Protocol: 26-bit Wiegand
• Available External Wiegand Input: 1
• Onboard Reader Note: Manual shows Wiegand 1 connected to the onboard proximity card reader
• External Wiegand Wiring: Wiegand 2 terminals are shown for a compatible Wiegand device
• Wiegand Direction Note: Manufacturer documentation lists Wiegand input for the 27-220; do not treat it as a universal Wiegand-output slave reader unless confirmed for the specific controller design
• Event Inputs: 2
• Digital Inputs: 2
• Event Input Uses: Request-to-exit, log mode, remote open, remote open and log, arming circuit, and remote operation modes where configured
• Timers: Dual 365-day timers, one per relay
• Additional Timer Functions: 7-day timers, holiday timers, and special-event timers
• Limited-Use Access: Use-based, 7-day, and 365-day restrictions supported
• Anti-Passback: Supported
• Reports: Event reports with CSV export
• Firmware Updates: Via app when available
• Input Power: 12 to 24VAC/DC listed on spec sheet
• Included Power Supply: PS-12DC1 12-VDC power supply
• Current Draw at 12VDC: Less than 111 mA with one relay latched and LED components on
• Current Draw at 24VDC: Less than 60 mA with one relay latched and LED components on
• Dimensions: 6.21 in. H x 7.44 in. W x 5.25 in. D
• Shipping Weight: 8 lb.
• Operating Temperature: -15°F to 158°F
• Faceplate: Stainless steel
• Enclosure: Powder-coated steel
• Included Components: Edge E2 unit, programming pad, key, four carriage bolts, four hex nuts, and PS-12DC1 power adapter
• Mounting Style: Post / pedestal mount
• Intercom Note: This model does not include an intercom; Edge E2 intercom version is available separately
• Safety Note: Reversing or other safety devices should always be used on automatic gate systems
• Warranty: Two-year limited warranty

Conclusion

The Security Brands 27-220 Edge E2 SecurePass is a smart prox reader with built-in access control for up to two gates or doors. It can function as a stand-alone card-based entry system by wiring its relays directly to gate operators, door openers, locks, or control circuits. For larger Edge family layouts that need separate readers wired back to a controller, the Security Brands Edge E4 27-240 is the controller option to consider.