Precision PRO Sprayers

• With a 75 ft. Professional Rated Reinforced Hose and Self-Priming Pump.
• Poly trigger gun: 15” Poly trigger spray gun 3/8” barb inlet connection 100 psi max
• Standard demand pump with 4‐foot Power cord: 1.4 GPM open flow, Viton ® valves,
  Santoprene ® diaphragm, 60 PSI Demand Switch, and 3/8” NPT‐Female ports.
• Hose: 3/8” inside diameter and 55’ length clear vinyl hose with reinforced spiraled
  polyester yarn
• 4‐foot solution intake
  line, with a 18” black poly main intake for placement into a jug.

This product is designed to spray hazardous chemicals that can cause serious personal injury if it comes into contact with the user or others or if inhaled/ingested. Failure to follow operating instructions or misuse of the product can result in serious physical injuries.

“RMR SOLUTIONS, LLC ASSUMES NO LIABILITY FOR THE SPRAYERS USAGE AS THEY
HAVE NO CONTROL OF THE OPERATORS AND PRODUCTS BEING USED.”
THE USAGE OF THIS PRODUCT IS THE SOLE RESPONSIBILITY OF THE OPERATOR. FOR ANY WARRANTY ISSUES, CONTACT: WARRANTY@PRECISIONPROSPRAYERS.COM
OPERATION INFORMATION:
∙ Use on a stable surface
∙ After drawing the solution from the other container, the pump forces the solution to the spray wand under pressure
∙ The pump will shut off once it reaches 60 PSI (pressure switch on the pump)
∙ By opening or closing the valve on the wand, flow can be regulated. Flow will increase as the trigger is squeezed.
∙ The wand sprayer tip is adjustable and can be changed to spray as a jet or as a mist. ∙ The suction supply line should be checked regularly and flushed with water to clear any accumulated debris or RMR-Neutralizer Instant Chlorine Odor Eliminator to prevent corrosion.