Custom Front Windshield
for SDR Cage Shown
KEEP THAT HEAD TURNER TURNING HEADS! 🔥🤘🔥
We see you. We got you. 👊 Custom cages for your machine are one of the ultimate upgrades. Why not take it to the next level with Dirt Warrior Accessories custom front & rear windshields to fit your custom roll cage, roof or doors?
- PLEASE NOTE: We do not take custom measurements over the phone. You will need to bring your SXS to the DWA facility! If you aren't local, that's ok, make a trip to one of the most beautiful areas on the planet to SXS and we'll get you taken care of and you'll have a blast riding at the same time! 😁
We will fabricate your windshields to fit the new geometry of your cage, providing even more protection for yourself and your passengers. Mother Nature won't have a chance to rain on your parade.
We can work with just about all custom cage designs and manufacturers including; Pro Armor, UTV Pros, SDR, VooDoo, Vent, RSK, Cage WRX, and more!
Wind, dust, cold, snow, rain, whatever! We got you covered using the same world famous DWA fabrication process that we have use for the 1000's and 1000's of windshields we have already fabricated, manufactured, produced, sold and seen enjoying the endless trails of this glorious planet. 🤘
Have any other ideas? Let us know! And while you're at it, you might as well customize the color and tint. 😎 Let's get the process started. Use the order menu above to give us the details and what you're looking for and we'll get back to you with a price quote to give your machine the look you want. No credit card or payment information is required at this time. Let's go!
GET YOUR FREE QUOTE - You will not be charged for your quote. Price will be determined after all necessary information is gathered. Payment will be due before fabrication begins.
The aluminum frames are powder coated in textured black making it more scratch resistant than standard smooth powder coats. Standard Textured Black with accent colored emblem is stocked. If you would like a custom color, allow an additional 2 weeks.
Customize with a wide range of stock and custom colors. Or simply choose from the common colors available in the emblem color choices selection menu above!
If you have any questions about colors or fitment, message us on the Contact DWA page.
PLEASE NOTE: Each windshield was templated by our team of fabricators using the best technology and equipment to get the best fit possible.
The nature of how these UTVs & SXSs are manufactured and assembled at the factory, no two machines are ever exactly alike. That is why we leave a minimum tolerance to accommodate for each machine's slight differences. This does not convert your machine into a submarine, expect minimal to no water entering through your windshield where it links to the roof, hood or a similar point.
NOTE:
LOWER DOORS/PANELS NOT INCLUDED
UTV/SXS NOT INCLUDED
We do not take custom measurements over the phone. You will need to bring your SXS to the DWA facility. Out of town? Make a trip of it and come ride the beautiful trails of Southern Utah!
Have a DiRtY DAY in Style!
DIRT WARRIOR UTV & SXS ACCESSORIES
Custom Roll Cage Front & Rear Windshields - Free Quote
FITMENT
No matter the custom cage on your rig, we can design, fabricate and manufacture windshield solutions that will take your machine to the next level.
We can work with just about all custom cage designs and manufacturers including; Pro Armor, UTV Pros, SDR, VooDoo, Vent, RSK, Cage WRX, and more!
- Polaris Custom Roll Cages
- Can-Am Custom Roll Cages
- Kawasaki Custom Roll Cages
- Honda Custom Roll Cages
- Yamaha Custom Roll Cages
- Textron Custom Roll Cages
- Mahindra Custom Roll Cages
- Arctic Cat Custom Roll Cages
- CFMoto Custom Roll Cages
PLEASE NOTE: We do not take custom measurements over the phone. You will need to bring your SXS to the DWA facility.
INSTALLATION
PLEASE NOTE: We do not take custom measurements over the phone. You will need to bring your SXS to the DWA facility.
GENERAL FRONT WINDSHIELD
INSTALLATION INSTRUCTIONS PDF - CLICK HERE
TOOLS NEEDED FOR INSTALLATION:
- 11 mm or 7/16" Wrench
- #3 Phillips Screwdriver
OPTIONAL: Screw Gun with 11 mm or 7/16" Socket and #3 Phillips Tip
GENERAL REAR WINDSHIELD
INSTALLATION INSTRUCTIONS PDF - CLICK HERE
TOOLS NEEDED FOR INSTALLATION:
- 11 mm or 7/16" Wrench
- #3 Phillips Screwdriver
OPTIONAL: Screw Gun with 11 mm or 7/16" Socket and #3 Phillips Tip
Dirt Warrior Accessories' YouTube installation video playlists.
If you have any questions about front windshield installation, please message us on the Contact DWA page.
OTHER PRODUCTS
More Awesome DWA Products - CLICK HERE
DWA Swag - CLICK HERE
RV Toy Hauler Patio Conversion Cable Kit - CLICK HERE
MANUFACTURING
All of our Vaults, Windshields and DWA Accessories are manufactured right here at our facility in St. George, UT, USA. The magic of design, CAD, fabrication, CNC, manufacturing, welding, product assembly, QA and shipping all happen right here on our shop floor. Come by and visit us anytime!
Click here for updated manufacturing lead and shipping time information.
