• CB-4012-SS Stainless Steel Wall Mount for the Grizzly stove CB-1210and Grizzly stove CB-2000
• For non-certified recreational setups, provides shielding between the stove and the mounting surface. Follow the stove and mount instructions for permitted clearance reductions.

• 4 3/16"(10.64cm) from wall to center of flue collar
• 16 5/8"(42.2cm) wide
• 51 7/8"(131.7cm) tall when flue shield is fully extended
• 39 3/8"(100cm) tall when flue shield is completely reduced

Open full-size diagram

• For non-certified recreational setups, provide a 14" lateral stove clearance from a surface left or right of the stove unless a Side Shield CB-2216-SS is used as specified in the installation instructions.
• For non-certified setups, maintain a 1" air gap between the bottom plate and the surface below, as specified in the mount instructions. For certified units, follow the certified stove manual and maintain the separate pipe-clearance requirement.
• We have two other mounting options,  Wall mount with sliding tray CB-2213-SS and Wall mount with fresh air intake CB-2277-SS .
• Includes 37" of flue shielding. For non-certified setups that require pipe shielding, the flue shield must run behind the pipe along the entire wall-facing run. If you have more than 37" of flue pipe inside, you will need enough Flue shield extensions CB-2215-SS-30 to cover the rest of the way.
• Comes with side guards to prevent heat from spilling onto the surface it is mounted to.

• Stainless steel
• Mild steel mounting bracket
• 4 x 1" bushings and hardware