• CB-2213-SS Stainless Steel Wall Mount With Sliding Tray for the Grizzly stove CB-1210  & Grizzly stove CB-2000
• Reduces clearances from the stove to the surface the wall mount is mounted to, saving square footage.

Open full-size diagram

• 4 3/16"(10.64cm) from wall to center of flue collar
• 16 5/8"(42.2cm) wide
• 22 7/16"(57cm) when tray is pulled open
• 12 9/16"(31.91cm) when tray is pulled closed
• 51 7/8"(131.7cm) tall when flue shield is fully extended
• 39 3/8"(100cm) tall when flue shield is completely reduced

Open full-size diagram

• You must provide a 14" clearance from a surface left or right of the stove unless a Side Shield CB-2216-SS is used.
• Can be installed with a 1" air gap between the bottom plate and a surface below. 
• We have two other mounting options, Wall mount CB-4012-SS standard mount or Wall mount with fresh air intake CB-2277-SS.

• Comes with 37" of flue shielding. The flue shield must run behind the pipe the entire way up the wall. If you have more than 37" of flue pipe inside, you will need enough flue shield extensions CB-2215-SS-30 to cover the rest of the way.
• Comes with side guards to prevent heat from spilling onto the surface it is mounted to.

• Stainless Steel
• Mild Steel mounting bracket
• 4 x 1" bushings and hardware

• Grizzly (CB-1210)
• Flue Shield Extensions 30” CB-2015-30-SS
• Side Shield CB-2016-SS