Hub 2

Clicks loud. Spins fast. Don't flop.

You want a hub that sounds like it's starting beef with the pavement? This is that. 120 points of engagement, so the drive picks up every 3 degrees. CNC'd from proper 7075-T6. And the rear runs a 10mm bolt-in axle, so you can put pegs on it, which almost no mountain bike hub lets you do.

Will it fit my bike?

• Any 36-hole rim. Both hubs are drilled 36H, so you can build them into a 26, 27.5 or 29 inch wheel.
• Rear: designed for frames with 135mm rear spacing and 10mm dropout slots (the standard quick-release style on many hardtails). Shimano HG-pattern cassette freehub and disc brake mount. Not verified for 142x12mm thru-axle frames.
• Front: forks with 100mm spacing and a 9mm quick-release, with disc mount.
• Pegs: fit pegs on the rear 10mm axle. Our Monogram pegs come with a conversion kit. The front is quick-release, so no pegs at the front.
• On the Collective C100, fitting Hub 2 (or the ready-built W2 wheelset) is how you make the bike peg-ready.

Axles not included. Build it your way, or get it ready-built in the W2 wheelset.

Spec

Rear:

• 10mm bolt-in (peg-ready)
• O.L.D.: nominal 135mm, for 10mm dropout slots
• Freehub: Shimano HG-pattern splines
• 4 x sealed bearings
• 120 engagement points
• 36H drilling
• Material: CNC-machined 7075-T6 aluminium
• Weight: 287g

Front:

• QR axle (9mm)
• O.L.D. 100mm
• 2 x sealed bearings
• 36H drilling
• Weight: 177g

Anodised Black. Read more in our guide to peg-ready hubs and 29-inch wheels.