ESP-2WIRE 50-Station Decoder Controller - Expandable to 50 stations using 2W-1 Decoders (Sold Separately)
The ESP-2WIRE Controller and 2W-1 Decoder continue Rain Bird’s legacy of the best-in-class 2-wire experience with an approachable platform for projects up to 50 stations.
With new Decoder Auto-Address functionality all decoders connected to the 2-wire path are found and assigned to stations providing significant time savings. After decoders are programmed, the ESP-2WIRE Controller programs just like the popular ESP-ME3 Controller.
With no special wire, wire connector or grounding requirements, contractors can now take advantage of all 2-wire benefits with a familiar platform that’s easy to install and program.
-
50-Station capacity standard without the need for expansion modules
-
2W-1 Single Station Decoders Sold Separately
-
Compatible with standard direct burial irrigation wire and standard irrigation wire connectors
-
Decoder Auto-Address to detect and assign decoder addresses to stations automatically
-
Supports up to two 2-wire paths
-
Diagnostic LEDs on the back plane and on each 2W-1 Decoder for advanced troubleshooting
-
4 available programs with up to 6 start times for each program to meet the needs of varied landscapes
-
One-touch manual watering capability for ease of use
-
Large back-lit LCD display for improved visibility in low-light and direct sun conditions
-
Contractor Default™ allows you to easily save and restore your custom schedule
-
Delay Watering up to 14 days and automatically resume watering after the set delay has elapsed
-
Bypass Rain Sensor for any station gives you the ability to customize which stations react to a rain sensor
-
Seasonal Adjust by program allows you to easily reduce or increase watering by program
-
Upgradeable for WiFi-based remote monitoring and control via iOS and Android mobile devices (with LNK2 WiFi Module sold separately)
-
Internet-based weather information can be used to make daily adjustments to the irrigation schedule, saving up to 30% in water (with LNK2 WiFi Module sold separately)
-
Set Permanent Days Off per program to ensure watering never occurs on days when maintenance crews are on site (for Odd/Even/ Cyclic schedules)
-
Easy to install indoors or outdoors with pre-installed power cord
-
Input required: 120 VAC (± 10%), 60Hz
-
Output: 1.0A at 25.5 VAC
-
Master Valve/Pump Start Relay
-
External battery back-up not required. Nonvolatile memory permanently saves the current programming and a 10 year life lithium battery maintains the controllers time and date during power outages.
Dimensions
- Width: 10.7 in. (27.2 cm)
- Height: 7.7 in. (19.5 cm)
- Depth: 4.4 in. (11.2 cm)