4 Zone Head & Tail Puck Set MuxPuck Wiring System
An innovative solution to some common wiring problems and limitations in residential irrigation systems. The MuxPuck wiring system makes it possible to control all of your irrigation zones over a single pair of wires.
The head puck connects to the tail puck with a single pair of wires. One head puck can even control multiple tail pucks, allowing many different configurations. This systems allows you to control all of your valves with a single pair of wires rather than needing a dedicated wire for each valve.
Features & Benefits
- An intuitive LED indicator lets you know exactly what's going on in the MuxPuck system by telling you which zone is currently active and can even help with troubleshooting.
- MuxPuck is waterproof and has no problem living in a wet valve box.
- Mux Pucks can be used in many different configurations, ranging from a simple 2 puck configuration with the controller and one valve box, to a more complex configuration with the controller and multiple valve boxes. Intuitive wiring diagrams at muxpuck.com show the different possible configurations. If you need an additional tail puck to support a more complex configuration.
- The MuxPuck system is designed for 24VAC controllers/solenoids and has been succesfully tested over wire distances of over 700 feet on many of the most popular sprinkler controllers.
- No programming or additional configuration required. Just wire it up like the wiring diagrams show and you're ready to go!
-
Mounting holes make it convenient to mount to a wall or zip tie into place in a valve box.
The MuxPuck wiring system consists of;
HEAD PUCK
- The head puck is installed at your existing irrigation controller. A single head puck can wire into up to 4 zones of your controller and you retain all of the smart functionality that your controller offers.
TAIL PUCK
- The tail puck is installed in your valve box, and can control up to 4 individual valves.
Why Choose MuxPuck?
- Compatible with any sprinkler controller that drives 24VAC solenoids.
- Can source up to 1A per channel.
- 12" 18AWG marine rated flying leads for each zone.
- Completely waterproof.
- LED indicates zone in operation.
- Can run up to 700 ft. of wire between pucks. Any direct burial wire such as generic landscaping wire can be used, potentially saving hundreds of dollars over multi-core sprinkler wire.
- Allows you to use all zones on your controller without giving up any of its smart functionality.
- Retain full power to each solenoid rather than sacrificing half of the power like other diode-based solutions.
Adding zones to an existing irrigation system can present challenges. Don't let wiring constraints derail your plans.
Many expansion plans are hampered by the daunting task of trenching in additional wires between the controller and the valve box because there aren't spare wires available to control the additional valves.
With MuxPuck, as long as you've got 2 wires between your controller and your valve box, you'll have full control over up to 4 valves without sacrificing any of the functionality of your controller.
Downloads