Maximum Contact Decoupling & Guaranteed Non-Marking Surface Protection

Our Vibe-Guard™ Acoustic Interface Squares provide expanded vibration dissipation for high-mass audio components, subwoofers, heavy power amplifiers, and bookshelf monitors. Precision-crafted from proprietary Vibe-Guard™ Acoustic Elastomer, these square interface pads maximize surface contact area and ensure clean, flush edge alignment along equipment chassis, plinths, speaker corners, and isolation platforms.

Unlike standard industrial neoprene, rubber, or Sorbothane footers that leach volatile plasticizers and cause permanent chemical etching or dark ring stains, genuine Vibe-Guard™ Acoustic Elastomer is 100% plasticizer-free. It is guaranteed never to mark, stain, or chemically react with polyurethane-finished furniture, conversion varnish, lacquer, or solid hardwood rigidrack® shelves.

Vibe-Guard™ Interface Square Selection Guide

High-contact square interface pads available in sets of 4 and sets of 8, engineered for edge-to-edge component isolation, monitor stands, and subwoofer bases.

• 1.25" Square (1.25" × 1.25" × 1/8" Thick)

  • Target Load: 20 to 80 lbs. per set of 4

  • Recommended Gear: Desktop monitors, bookshelf speaker corners on steel stand top-plates, and medium solid-state power components (~5–20 lbs/square).

• 2.0" Square (2.00" × 2.00" × 1/8" Thick)

  • Target Load: 60 to 200+ lbs. per set of 4

  • Recommended Gear: Heavy stand-mounted speakers, tube power amplifiers, heavy hardwood audio platforms, and rigidrack® pillar interface points (~15–50+ lbs/square).

• 3.0" Square (3.00" × 3.00" × 1/8" Thick)

  • Target Load: 120 to 400+ lbs. per set of 4

  • Recommended Gear: Subwoofers, large floorstanding loudspeakers, high-current power conditioners, and direct replacement pads for 3"×3" Hardwood Iso-Blocks (~30–100+ lbs/square).

Edge-Alignment Advantage: Square profiles provide up to 27% more usable surface contact area than equivalent round discs, preventing corner tipping and creating clean, parallel lines along rectangular speaker bottoms and amplifier chassis rails.

Key Specifications & Features:

• Proprietary Formulation: Genuine Vibe-Guard™ Acoustic Elastomer.

• Profile Thickness: 1/8" (0.125") precision-calibrated decoupling profile.

• Surface Safety: 100% non-marking, zero-leach chemistry (guaranteed safe for polyurethane, conversion varnish, lacquer, and hand-rubbed oil finishes).

• Mounting & Backing Options:

  • Non-Adhesive: Loose barrier pads serving as independent, clean, repositionable acoustic decoupling coasters.

  • Peel-&-Stick (One Side): High-shear adhesive backing adheres directly to component chassis or speaker corners, keeping the wood-facing side loose and non-marking.

  • Adhesive (Both Sides): Double-sided high-tack backing for permanent, anchored isolation interfaces.

• Package Options: Sold in matched sets of 4 or sets of 8.

• Origin: Precision sourced, formulated, and converted in the USA.