The Plug & Play Fender Eliminator Kit is a triumph T120 fender eliminator and triumph street twin fender eliminator built for Triumph's updated liquid-cooled Modern Classic platform. The challenge on these models is electrical, not mechanical. Generic fender eliminator kits use universal connectors not matched to Triumph's CANBUS load specification. The result on this platform is hyperflash, signal failure, or a weekend of forum troubleshooting for what should have been an afternoon install. This kit resolves that at the source: an OEM-matched harness wired to the correct CANBUS load spec, connecting at the factory sub-harness point without resistors or relay swaps.

For T120, T100 (2017+), Street Twin, and related models on this platform, the install is a direct swap on stock hardware. No modification to the factory wiring, no drilling, no fabrication. The stainless underplate geometry is built specifically for the 2016-forward subframe.

Key Features & Benefits

• CANBUS-Matched OEM Wiring Harness — Wired to Triumph's CANBUS load specification. Connects at the factory sub-harness point without resistors or relay swaps.
• Platform-Specific Underplate Geometry — 304 stainless, powder coated semi-gloss black. Built specifically for the 2016-forward subframe.
• LED Cateye Tail Light with Integrated Plate Light — Single LED unit handles brake, running, and license plate illumination. Red or Smoked lens.
• Removable License Plate Holder — Removes cleanly for riders running a side mount or shock mount alternative.
• Complete System, Nothing Left to Source — CANBUS harness, tail light, underplate, and stainless hardware all included.

What's Included

• Laser-cut stainless steel underplate with integrated tail light mount, powder coated semi-gloss black
• CANBUS-matched Plug & Play wiring harness with OEM connectors
• LED Cateye tail light (Red or Smoked lens) with built-in license plate illumination, 3-pin connector
• Removable license plate holder
• Stainless steel mounting hardware

Technical Specifications

• Material: 304 Stainless Steel (.065 wall), laser-cut
• Finish: Powder coated semi-gloss black
• Tail Light: LED Cateye, dual function (brake/running) with integrated LED license plate illumination
• Lens Options: Red / Smoked
• Harness: Plug & Play with OEM-matched connectors, CANBUS-compatible (Triumph liquid-cooled platform, 2016+)
• Install Type: Bolt-On, Plug & Play Wiring
• Skill Level: Beginner | Est. Install Time: 1.5–2 hours
• Fitment Note: T120 frame changed 2016; T100 frame changed 2017. Stock seat shroud hides tail light on T100/T120 — Slammer Seat required to complete install on those models.

Warranty & Support

• 1-Year Limited Warranty: Covers defects in materials or workmanship.
• Expert Assistance: Call +1 (877) 999-BRIT or email support@british-customs.com for fitment questions.

Install Guide

1. Remove Factory Fender: Unbolt the stock rear fender and tail light assembly.
2. Mount Eliminator Plate: Secure the stainless steel plate using included hardware.
3. Install LED Tail Light: Attach the Cateye assembly.
4. Connect Wiring: Plug into factory connectors.
5. Attach License Plate: Mount to bracket.