The Benny Bradley's Cabinet Latch Locks can be easily opened by parents with one press against the spring-loaded latch, without any special keys or magnets. Featuring a large adhesive surface area of 2" x 2", with long latch arm 2.5" in length, these locks are easy to install, and secure against your baby.

See it in Action

Our Features

Benny Bradley's Invisible Cabinet Latch Locks

Strong & Secure

Holds a 25 lb pull. Watch the test on YouTube.

Benny Bradley's Invisible Cabinet Latch Locks

Seamlessly Hidden

Each latch mounts inside the cabinet, so nothing shows from the outside and there's nothing for a curious toddler to study and copy.

Benny Bradley's Invisible Cabinet Latch Locks

Easy Installation

No tools needed and damage-free installation

How-to

How to install Benny Bradley's Invisible Cabinet Latch Locks

How to uninstall Benny Bradley's Invisible Cabinet Latch Locks

FAQs

Product Specific Questions

How long does this take to ship?
We have partnered with Amazon to offer a world-class shipping service for this product. For US customers, we currently offer:

3-5 business day standard shipping
Or
2 days shipping

Standard shipping is free on orders of $40 or more, so two boxes ship free.

How many come in one order?
Each box has 10 latches and 10 buckles: enough for a typical kitchen plus a bathroom vanity.

What are the dimensions of the latch?

The latch arm is about 2.5" long (6 cm)
The latch's adhesive surface is 2" x 2" (or 5cmx5cm)
The catch/buckle's adhesive surface is 2" x 1.25" (or 5cm x 3.1cm)

Can you take these off?
Of course!
You can point a hair-blow-dryer at the adhesive while gently peeling it away from the cabinet at an angle.
You can also use dental floss in a sawing motion to cut off the adhesive as well.

Do these work for recessed cabinet doors (the doors fit inside the frame)?
The short answer is it should work, even for recessed cabinet doors.
To be doubly sure, you will need to do some measurements.

Our locks will fit almost all cabinetry with the following conditions:

It'll need at least 2.75 inches of space for the latch arm to fit - measure your planned placements for any obstructions behind a cabinet swinging door, like a low-hanging kitchen sink.
It'll need 2x2 inches of space to adhere to the latch lock and 2x1.25 inches for the catch/buckle unit if needed. Ensure this adhesion space isn't obstructed by bolts from the cabinet door handle.
Our locks will be long enough for countertop overhangs that are at most 1.5 inches long, measured from the cabinet box, not the cabinet door.

Do you have the option of screwing these on?
Yes, there are holes available for screwing.
However, they're not included with our product.

What size screws would I use if I wanted to go that route?
Choose a screw with the following dimensions.

The diameter of the screw head - Must be less than 5mm.
The full length of the screw - Should be less than 10mm, just to make sure it doesn’t penetrate most cabinet boards.
The Diameter of the screw shaft – must be less than 2mm, and should be pointed to ensure it doesn’t warp the wood the opposite side of the drilling entry.

Is there a warranty?
Yes, a lifetime warranty. We're confident nothing will go wrong, but if it does, we'll make it right. Register your latches at bennybradleys.com/apps/product-registration and we'll replace any latch that fails, free.