Creating two separate private rooms have never been easier. With our F-shaped Two-Room Kit you can quickly and conveniently turn any corner space into two separate rooms, each with their own lightweight accordion door for easy access. Minimal tools required for installation, so anyone can get the space they need, in no time.

The F-shaped Two-Room Kit is both a popular choice for businesses looking to create treatment rooms, consultation rooms, or just a more private working area, as well as for residential use. The kit offers an easy way to create two side by side rooms that can easily be position in any corner of your space.

The direction of the F-shape can be installed in any way that fits your space, but note that the doors are by default located in the most economical position on the width of the kit as illustrated in the product images. (To change this, please request a custom quote)

The wall kit is easily mounted to your existing walls with the included mounting brackets. and a few basic tools. 

This temporary wall kit offers endless opportunities, with our preset kit room sizes ranging from 33 to 108 sq. ft. (Larger sizes available through custom orders)

Need a custom size?
Don't find your size? Not entirely sure what size is best for your space? Contact us via live chat, email, or phone! We have product and space design experts ready to help answer any questions.

If you are looking to set up a single room in a corner, check out our L-shaped wall kit.

Say goodbye to drywall, dust, noise, and debris, and create the space you need today.

What's Included

Wall Panels
Your kit includes our signature wall panels that are 3" thick and made of Moisture and Impact Resistant Fiberglass. These panels range from sizes 4'x4'-3'x1' and snap together using included connectors for an ultra-secure two-way connection.

The included accordion door kit is 36" wide and either 84" or 96" in height, depending on the height of the partition you purchase. The kit comes with a specialized lintel that includes a track for the accordion door. Simply slot the folding door into the track and install it between two panels, locking the lintel and door into place using the lug or 2-way connectors. Each door includes two thresholds, a double-sided handle, and three integrated magnets to hold the door in position when closed.

The doors are, by default, positioned on the width of the wall kit (as pictured). If you would like to position the door(s) differently, feel free to reach out before placing your order, and we can help you with that.

The Wall Mounting Brackets make it easy to anchor the partition to your existing walls keeping the entire partition safely secured. When removed, the only marks left on your walls are the small holes from the screws, allowing for easy filling and painting.

To mount, screw the bracket to the fixed wall, nest the panel inside the L, and screw the bracket to the panel. Detailed instructions on this can be found in the "Assembly" tab above.

Included connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly. 

Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Every kit includes enough caps to seal off the exposed perimeter of your wall. Finishing caps for the top are not included. Extra finishing caps can be added from our Accessories page.

Before You Buy

Before you buy, the most important thing to do is measure your ceiling height. Your ceiling must be at least 2" higher than the height of your partition. For example, if you're looking to buy an 8' partition, your ceiling must be at least 8'2". This allows you to assemble the partition comfortably and place it in your space. Without any clearance, you're at risk of not being able to assemble/install the partition at all, which we don't want! 

Do also make sure to check your floor for dips and bulges. Uneven flooring can impact the installation of your product.

Once you've confirmed your ceiling height and ensured your floor is level, you're good to go.

Note that the listed dimensions do not take into account the 3" thickness of the wall panels.