The Mounted L-shaped Partition Wall With Door Kit allows you to easily install a temporary or permanent room with an included accordion door anywhere in your home or business.
Whether you need an office, study room, guest bedroom, or just some added privacy, you can assemble your new space quickly and mount it to your existing wall with as little as a drill and a screwdriver.
This kit is perfect if you want your partition wall attached to an existing wall rather than freestanding.
What's Included
Wall Panels
Your kit includes our signature wall panels that are 3" thick and made of Moisture and Impact Resistant Fiberglass. These panels are easily assembled and snap together using lug and 2-way connectors for a stable and secure fit.
Framed Accordion Door
The included accordion door kit is 36" wide with a maximum opening of 30".
It includes a specialized lintel piece with a track that allows the door to be easily assembled and installed on our modular walls. The door kit includes a double-sided handle, and an integrated magnet to hold the door in position when closed.
Note the door is placed on the width of the wall in the most economical position. If you have a special request for the door placement reach out to us, and we can customize the kit to match your requirements (additional costs may apply)
Wall Mounting Brackets (x2)
The L-Shaped Wall Bracket makes it easy to mount any modular wall kit to existing walls to provide additional structural support. This reduces the cost of the kit, as it weighs less for shipping and requires fewer panels.
Screw the L-Shaped profile to the fixed wall, nest the panel inside the L, and screw the channel to the panel. Detailed instructions on this can be found in the "Assembly" tab above.
Lug and 2-Way Connectors
Included connectors are easily snapped into the panels, creating an ultra-secure connection between panels from all sides. These connectors allow you to connect panels to each other in seconds, making for easy assembly.
Finishing caps are used to close off any exposed connector holes, giving the exterior of your wall a clean, finished look! Your kit includes enough caps to seal off the entire perimeter of your wall.
Before You Buy
Before you buy, the most important thing to do is measure your ceiling height. Your ceiling must be at least 2" higher than the height of your partition. For example, if you're looking to buy an 8' partition, your ceiling must be at least 8'2". This allows you to assemble the partition comfortably and place it in your space. Without any clearance, you're at risk of not being able to assemble/install the partition at all, which we don't want!
Do also make sure to check your floor for dips and bulges. Uneven flooring can impact the installation of your product.
Once you've confirmed your ceiling height and ensured your floor is level, you're good to go.
Note that the wall panels are 3" thick, which means that when you connect two walls in an L-shape, 3" will be added to the length of one side of the wall kit. You can decide which side when you connect the walls.
Door Positioning
By default doors are placed in the most economical position on the "width wall". If you have a preference for door placement, please reach out to us, and we can check if that is possible with your dimensions, or if we can do a custom order for you.
Note that doors need to have a least 1ft of wall panel on each side.
Assembly Guides
Our wall kits are designed to be completely DIY. Two people can typically assemble and install any of our wall kits in 90 minutes or less*, with little to no tools needed.
Note that a drill and/or screwdriver is recommended for installing the accordion doors and mounting the wall kit to your existing walls.
If you have any questions regarding assembly feel free to give us a call on (855) 348-4330, email us at hello@diyversify.com or send us a chat right here on our website. We are available Monday-Friday 9AM to 5PM (est).
*Depending on the size of your wall kit