The BAMF 2 expands on the original and focuses on improved wind penetration for higher launches. Aerodynamically, the wing shape was modified to be less affected by turbulence while the lift is slightly increased closer to the root. All cross-sections on the fuselage are decreased and the pushrod exits are further refined for a tighter install.
The BAMF 2 comes with a center split 2-piece wing with a nice carbon joiner, with the option of a very simple removable fin that will be strong enough for *most* pilots. For extremely powerful launchers, it's probably still safer to glue the fin on.
The nose length is optimized to reduce the need of nose weight and to make gear selection, install and maintenance extremely easy.
All models are made with solid Cascell cores, carbon shear webs, and high-quality finish.
Features:
- Solid Cascell moulded wing and tails
- Light: CW30 skin
- Standard: CW40 skin
- Strong: Co-axial CW60 skin
- Tails: CW20 skin
- 1-piece fuselage
- 2-piece wing (centre split)
- Nosecone
- Right-handed launch (please message us for left-handed version)
- Removable wing
- Removable horizontal tail
- Removable vertical tail (optional during build)
Flight Characteristics:
- Incredibly high launching
- Cuts through wind and turbulence at low weight
Available in a range of color options:
Specifications:
Wingspan: 1495 mm
Wing area: 18.55 dm²
Wing airfoil: modified Synergy 2
Horizontal tail area: 2.0 dm²
Light AUW: ~205-210 grams
Standard AUW: ~215-220 grams
Strong AUW: ~225-230 grams
Recommended Gear:
Receiver: FrSky GR6, FrSky R6, Spektrum AR410, AR6610T, Futaba R3004SB
Servos: 4* KST A08N v6, 4* X08N v6
Battery: 1S LiPo 350 mAh or 500 mAh
Include Accesories:
- 3D launch blade
- Wing control horns
- Rudder control horn
- Stabiliser control horn
- Wire for springs
- Wire for pull-string
- Crimps for pull-string
- Wing pushrod sleeves
- Wing metal pushrods
- Wing bolts
- Tail bolts
- Ballast tube
- Ballast clip
Build manual available here.
Suggested Setup:
CG:
Extremely calm conditions: 69 mm
Regular conditions: 67 mm
Very windy and turbulent conditions: 64.5 mm
Flight modes:
Launch Preset: 0mm (flush)
Zoom: 2mm upwards
Speed: 0mm (flush)
Cruise: 3mm downwards
Thermal 1: 6mm downwards
Thermal 2: 8mm downwards
Ailerons:
Speed: 6 mm upwards, 8 mm downwards;
Cruise: 6 mm upwards, 13 mm downwards;
Thermal 1: 5 mm upwards, 18 mm downwards
Roll: 10 mm in each direction
Elevator:
Speed: 6 mm up, 8 mm down;
Cruise: 10 mm up, 10 mm down;
Thermal 1: 11 mm up, 11 mm down;
Thermal 2: 11 mm up, 11 mm down
Snap Flap:
1.5 mm at full elevator deflection
Mixing ailerons and rudder:
5mm rudder with full aileron deflection
Servos and electronics not included.