The Sight In 1 is a tool that every shooter, at any experience level, should have in their shooting toolkit.
The Sight In 1 saves you valuable time (and bullets) by allowing you to zero your scope with a single shot. Multiple sizes to fit nearly any scope.
FAQ
What distances can SIGHT IN 1 be used to sight in at?
SIGHT IN 1 can be used to sight in at distances of less than 25 yards to distances of over 300 yards.
This is accomplished by using a short range sight in distance (usually less than 50 yards) to sight in for longer distances (100, 200, 300 or other desired distances) - review the charts and watch the videos to see how this works.
Once sighted in, take confirmation shots at your desired final distance.
What distance should I sight my firearm in at?
Use the charts and tables provided below to determine the distance to use the SIGHT IN 1 device for your firearm to be zeroed in at the distance you want. Use the muzzle velocity of your bullet (see Muzzle Velocity Chart below) or find your bullet on the ammunition chart provided below.
For the best accuracy you can use a ballistics app or program or can search online and use the
SHOOTERS CALCULATOR to input the exact conditions you will be shooting with.
What setting should I use for the red dot brightness?
If it is bright outside (sunny day) then you would need to set the red dot brightness at a higher setting. If it is low light conditions (early morning) then a lower setting will work better.
What if my red dot is not clear or distorted?
Make sure that the SIGHT IN 1 device is flush with the end of your scope and not loose. Move your eye slowly up/down and side to side until you find the point of greatest clarity for the red dot. Turn the power down on your scope to lower setting.