Description

Ships in 1-2 business days

Quick Size: Covers approximately 2.5 sqft at a depth of 1/2" (5 lbs of EPDM rubber granules, 1 lb of Aromatic binder, & 1 pint of Primer)

You will need: A utility knife, a bucket for mixing, a paint brush, a rounded trowel, soapy water and gloves

1. Make sure you pick a dry day to patch your rubber running track surface. We recommend over 40 degrees.
2. Using a sharp utility knife, create a clean cut around the area you would like to patch. When cutting the area, make sure to cut the edges of the area at a 45-degree angle. This will create a stronger bond at the edges of the patch.
3. Clean the area of all loose granules and debris.
4. Use the primer your received in your package to prime the edges and the base layer.
5. Right after you prime, pour all of the rubber granules into the bucket and mix the entire content of the binder in a bucket or lined cardboard box.
6. Mix the content thoroughly. Make sure that all the rubber granules are coated evenly with the binder. Use the entire amount of binder and the entire amout of rubber that we sent you.
7. Using a rounded trowel spread the mix onto the area you are patching.
8. Use a mixture of water and liquid hand soap to lubricate the trowel after each pass.
9. Secure the area and let cure for 24 to 48 hours.

Download instructions

SDS  Sheets

Download SDS Seets