Key Benefits

• Higher performance than the Essential system for louder noise — two layers of 10kg MLV combined with Silent Floor Ultra Underlay deliver significantly more mass and impact isolation than single-mat systems
• Dual 10kg MLV layers for dense mass — two rolls of 10kg mass loaded vinyl with staggered joints add substantial mass to help reduce louder airborne noise, including voices, TV at higher volume, and general household noise
• Silent Floor Ultra Acoustic Underlay for impact isolation — installed above the MLV layers to reduce footfall and impact noise, and to provide a high-performance acoustic substrate directly under the carpet
• Suitable for carpet finishes — Silent Floor Ultra provides a compatible acoustic base for carpet installations without requiring adhesive bonding to the floor finish
• DIY-friendly installation — no structural work required; the system is laid over the existing floorboards and finished with carpet as normal
• Practical build-up depth — approximately 21mm overall, making it suitable for most rooms; check door and threshold clearances before ordering
• Built-in 5% waste allowance — calculator quantities include a 5% overage to reduce the risk of under-ordering on site

Important Notes 

• This system is designed for timber floors intended to be finished with carpet
• It is intended to improve both airborne noise and impact noise, but results will vary depending on the existing floor construction
• Sealant quantities are an approximation only and should be treated as a guide
• The calculator is provided as a guide only, and final quantities should always be checked before ordering

Installation Summary 

Installation involves:

1. Preparing the floor surface so it is clean, dry, and free from debris
2. Installing the first layer of 10kg MLV
3. Installing the second layer of 10kg MLV, staggering joints where possible
4. Sealing joints as required and applying Jointing Tape
5. Sealing perimeter gaps with AC95 Acoustic Sealant where required
6. Installing Silent Floor Ultra Underlay ready for carpet fitting

For a more detailed installation guide click here.

Calculator Disclaimer 

This calculator is intended as a guide only. Advanced Acoustics will not be held responsible for any decisions made as a result of using this calculator.