Key Benefits

• Maximum performance wall soundproofing for loud airborne noise — MuteClip isolation, 10kg MLV, and dual acoustic plasterboard combine to deliver the highest level of sound reduction available in our wall range
• Resilient clip and channel isolation — MuteClips and MuteClip Channel create a decoupled framework that reduces the mechanical transfer of sound through the wall structure, a key advantage over direct-bonded systems
• Suitable for stud and brick walls — the clip and channel system works on both stud party walls and solid brick separating walls, with installation method adapted to suit the wall type
• 10kg MLV for dense mass — a single layer of 10kg mass loaded vinyl is bonded between the plasterboard layers to add significant mass and improve airborne sound reduction, particularly for music and bass
• Two layers of 15mm Acoustic Plasterboard — double-layer plasterboard with staggered joints adds mass and rigidity to the finished wall lining
• Recommended where direct-bonded systems are insufficient — this system is a step up from the Essential and Plus wall systems and is suited to higher noise levels and more demanding situations
• Built-in 5% waste allowance — calculator quantities include a 5% overage to reduce the risk of under-ordering on site

Important Notes 

• This system is suitable for both stud and brick walls, but installation method and fixings will vary depending on the surface
• It is intended primarily for airborne sound reduction
• Fixings are not included or supplied by us
• Sealant quantities are an approximation only and should be treated as a guide
• The calculator is provided as a guide only, and final quantities should always be checked before ordering
• This system is more advanced than our Essential and Plus wall systems and is recommended for those with more advanced DIY / construction experience
• Electrical sockets and switches should only be removed and reinstated by a qualified electrician

Fixings Required 

• MuteClip direct to wall – Hammer Fix Plug & Screw
• MuteClip to stud frame – 5mm x 60mm Wood Screw
• 1st plasterboard layer to channel – 32mm Fine Thread Drywall Screw
• 2nd plasterboard layer to channel – 50mm Fine Thread Drywall Screw
• MuteClip Channel overlap – 20mm Steel Self-Tapping Screw

Installation Summary 

Installation involves:

1. Preparing the existing wall and ensuring it is sound and free from defects
2. Marking out and fixing MuteClips in the correct positions for your wall type
3. Fitting MuteClip Channel horizontally into the clips (including correct overlap where required)
4. Installing the first layer of 15mm Acoustic Plasterboard, leaving a small perimeter gap
5. Sealing the perimeter with AC95 Acoustic Sealant
6. Bonding the 10kg MLV to the plasterboard using contact adhesive and taping joints
7. Installing the second layer of 15mm Acoustic Plasterboard, staggering joints where possible
8. Sealing the perimeter again with AC95 Acoustic Sealant before finishing
9. The completed wall can then be skimmed or tape and jointed ready for decoration.

For a more detailed installation guide click here.

Calculator Disclaimer 

This calculator is intended as a guide only. Advanced Acoustics will not be held responsible for any decisions made as a result of using this calculator.