Adam’s Graphene Ceramic Glass Coating Advanced is our most refined glass coating formula to date, built specifically for glass surfaces that demand long-lasting protection and maximum visibility in poor weather conditions. Using updated graphene-infused ceramic resin technology, this advanced formula creates an ultra-slick, durable barrier that helps repel water, resist contamination, and keep glass cleaner for longer.

Designed for enthusiasts and daily drivers alike, the coating bonds directly to exterior glass to produce intense hydrophobic performance with excellent resistance to detergents, environmental fallout, and regular wiper use. When it rains, water beads up quickly and vacates the surface.

• Advanced Graphene Ceramic Resin Technology 
• Developed Specifically For Glass Surfaces 
• Creates An Extremely Hydrophobic, Slick Finish 
• Helps Improve Visibility During Rain and Harsh Weather 
• Resistant To Detergents, Road Grime, and Environmental Contamination 
• Easy Wipe-On, Wipe-Off Application 
• Long-Lasting Protection and Self-Cleaning Performance
• 12-15 Months Of Durability or Approx. 12,000-15,000 Miles

*Durability will vary based on climate, driving conditions, wiper condition, and maintenance routine.

Despite its durability, Adam’s Graphene Ceramic Glass Coating Advanced remains simple to apply with minimal effort. The result is a crystal-clear finish that improves visibility, enhances driving confidence in adverse weather, and helps maintain cleaner glass mile after mile. It's always recommended to let the coating cure for 24 hours without coming in contact with any water/weather conditions.

Instructions for General Use:

1. Thoroughly clean the glass with Surface Prep and dry the glass surface. It is highly recommended to clay and or Glass Polish the glass prior to application. The better the glass is prepped the better the coating will perform!
2. Check to ensure glass surface is not hot to the touch. Always try to work in the shade or perform the application early in the morning or late in the afternoon to avoid high temperatures that will adversely affect the coating’s application.
3. Apply numerous drops of Adam’s Graphene Ceramic Glass Coating to an applicator of choice and dribble directly onto the glass surface. Frame the area to coat and then cross-hatch to thoroughly spread the coating evenly.
4. Once the glass has been sufficiently coated, proceed to buffing off the excess until glass is streak free and crystal clear.
5. Repeat for all exterior glass surfaces. Multiple coats are not required, but permissible.
6. Allow the coating to cure without coming in contact with water for at least 12-24 hours.

Watch The Video Below To Follow The Recommended Application Process.

Common Sense Warning:

Graphene Ceramic Glass Coating Advanced is a solvent-borne system and will volatilize very quickly on a hot surface. If applied to a hot surface, streaking and hazing may be observed after wipe down. Simply use Adam’s Brilliant Glaze to remove any possible haze – coating will not be removed in the process and still be effective.